MACROMEDIA COLDFUSION MX-CLUSTERCATS Use Manual page 144

5 Open the Advanced IP Addressing dialog box by right-clicking Network
Neighborhood. Select Properties. On the Protocols tab, select TCP/IP Protocol and
click Properties and then click Advanced.
6 Select the computer's primary NIC in the Adapter field. Add the new IP address in
the IP Addresses region. You will use this address as the maintenance address and
machine address. Make a note of all IP addresses on the NIC.
7 Click OK, and OK again and click the Identification tab. Click Change.
8 Enter a new name for the computer in the Computer Name field. The name
corresponds to the new IP address that you just added. Do not change the Domain
field on this tab.
Note: The computer name on the Identification tab should only be a NetBIOS name,
not a fully qualified host name (FQHN). For example, support1.macromedia.com is a
possible FQHN. The first portion of this FQHN (support1) can be a NetBIOS name. Note
that support1 would also appear as the host name under the DNS tab in Protocols. The
domain under the DNS tab in this case would be macromedia.com. The Domain field on
the Identification tab is different; it has nothing to do with DNS but only corresponds to
your NT domain.
9 Close all open dialog boxes and restart the server.
10 For IIS 4.0: Reinstall the NT 4.0 Option Pack and then restart the server.
For IIS 5.0 or NES: Skip this step.
11 For IIS 4.0: You may need to reconfigure your websites using the Internet Service
Manager.
For IIS 5.0 or NES: Skip this step.
134 Chapter 7 Optimizing ClusterCATS