MACROMEDIA COLDFUSION MX-CLUSTERCATS Use Manual page 89

4 Click the New Probe button
The ColdFusion Web Application Probe settings dialog box appears:
5 Configure the application probe settings as described in the following table:
Field
Web Server
Pathname
Working directory
Startup parameters
Timeout (sec)
.
Description
Select the name of the server from the drop-down list.
Enter the absolute path to the ColdFusion probe. Do not
change the default selection unless you installed ColdFusion
to a directory other than the default installation directory.
Enter the absolute path to the probe's working directory. Do
not change the default selection unless you installed
ColdFusion to a directory other than the default installation
directory.
Replace the <URL> with the actual URL of the site you want
the probe to access, and replace <success string> with a text
string that appears on a page on the site you are probing.
Tips:
Be sure to include a space between the URL and the
success string that you specify. The success string must
be enclosed in quotation marks.
Do not modify the RESTART explicit parameter if you
want the probe to automatically restart the ColdFusion
Server upon detecting a failure. However, if you do not
want ClusterCATS to automatically restart the ColdFusion
Server upon detecting a failure, replace RESTART with
NORESTART.
Enter a time, in seconds, to indicate how long ClusterCATS
should wait before a ColdFusion server failure is registered.
Do not set this value to less than 60 seconds because
ClusterCATS might restart the ColdFusion server
inadvertently (due to network congestion, for example),
rather than detect an actual failure on the ColdFusion server.
Using ColdFusion probes 79