Advertisement
Quick Links
Installation - Operation - Parts
Complete Pressurized Bead System for
LineLazer 200HS/DC/MMA and LineLazer
250SPS/DC/MMA
Models:
25R268 1-Gun LL200
25R270 1-Gun LL250
25R267 2-Gun LL200
25R269 2-Gun LL250
80 psi (.55 MPa, 5.5 bar) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in the striper manual. Be familiar
with the controls and the proper usage of the equipment. Save
these instructions.
- For professional use only -
HS/MMA
SPS/MMA
HS/DC/MMA
SPS/DC/MMA
Related Manual
Bead Gun Kit
LLIV 200HS Repair
LLV 200HS/DC Repair and Parts
LLV 200MMA Operation, Repair, Parts 3A6466
250DC Repair
332230T
EN
332226
311021
3A3390
334053
Advertisement
Related Manuals for Graco LineLazer 250DC
Summarization of Contents
Complete Pressurized Bead System
Important Safety Instructions
Read all warnings and instructions in the striper manual for proper usage and safety.
General Warnings
Fire and Explosion Hazard
Precautions to prevent fire and explosion from flammable fumes, solvents, and fuels in the work area.
Equipment Misuse Hazard
Risks associated with misuse of equipment, including fatigue, alcohol, and exceeding pressure limits.
Specific Hazard Warnings
Skin Injection Hazard
High-pressure fluid can pierce skin, causing serious injury. Follow safety procedures.
Entanglement and Moving Parts Hazards
Risks from rotating parts and pinch points. Keep clear of moving parts and use guards.
Burn Hazard
Equipment surfaces and fluids can become very hot. Avoid touching hot fluid or equipment.
Personal Protective Equipment (PPE)
Wear protective gear like eye wear, hearing protection, and respirators for safety.
200HC/DC/MMA Compressor Mounting
Assemble Drive Components
Instructions for assembling compressor mounting and drive components for the 25R268 kit.
LL250 Compressor Mounting
Assemble Drive Components
Instructions for assembling compressor mounting and drive components for the 25R270 kit.
Routine Maintenance
Recycling and Disposal
Instructions for dismantling, recycling, and responsible disposal of the product.
California Proposition 65 Warning
Warning regarding cancer and reproductive harm as per California Proposition 65.
Charging Air Tank
Setting Bead Hopper Pressure
Procedure for setting pressure in the bead tank using the regulator valve.
Line Setup Configurations
0 to 8 inch Line Setup
Guidance for mounting bead gun for wider lines (0-8 inches).
8 to 12 inch Line Setup
Guidance for mounting bead gun for wider lines (8-12 inches).
2 Tank 1 Gun Setup
Connecting a 'Y' fitting to allow two tanks to flow into one gun.
Graco Standard Warranty
Graco Information
Information on obtaining the latest product details, patents, and placing orders.
Need help?
Do you have a question about the LineLazer 250DC and is the answer not in the manual?
Questions and answers