Hoval UltraGas 2300D Technical Information Installation Instructions
Hoval UltraGas 2300D Technical Information Installation Instructions

Hoval UltraGas 2300D Technical Information Installation Instructions

Condensing gas heating boilers for natural gas and liquid gas for modulating operation
Table of Contents

Advertisement

Technical information
Installation instructions
UltraGas
(70,100)
®
Condensing gas heating boilers
for natural gas and liquid gas
for modulating operation
Hoval products may only be installed and commissioned
by appropriately qualified experts. These instructions
are intended exclusively for the specialist. Electrical
in stal lations may only be carried out by a qualified
electrician.
Subject to modifi cations
|
4 217 214 / 02 - 11/19
These instructions apply to the following types:
Rated output levels at 40/30 ºC
and for natural gas
45-UltraGas
®
45-UltraGas
®
The floor-standing gas condensing boilers UltraGas
(70,100) acc. to EN 15502-1/15502-2-1 are suitable
and licensed for use as heat generators for hot water
heating systems with a permissible flow temperature of
up to 85 °C
. They are designed for continuously cont-
1)
rolled reduced operation in heating systems.
See technical data
1)
(70)
13.6 - 69.9 kW
(100)
20.9 - 100.0 kW
EN
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UltraGas 2300D and is the answer not in the manual?

Questions and answers

Summarization of Contents

Important Notes
General Safety Instructions
Essential safety guidelines for system operation and general precautions.
Explanation of Symbols and Warnings
Defines warning symbols and their meanings for hazard identification.
On Delivery and Warranty
Information regarding boiler delivery, warranty terms, and related procedures.
Manuals and Regulations
Details on available manuals and relevant industry regulations.
Regulations and Official Approvals
Lists relevant standards and directives for installation and operation.
Installation Procedures
Boiler Set-up
Steps for unpacking and positioning the boiler on a foundation slab.
Boilerhouse Requirements
Guidelines for suitable boiler room conditions, ventilation, and material restrictions.
Flue Gas Connection
Instructions for connecting and installing flue gas lines and systems.
Condensate Drain Management
Details on condensate drain options and installation variants.
Gas Connection
Procedure for connecting the gas supply line to the boiler.
Hydraulic Connection
Guidance on connecting the heating system and integrating the boiler.
Electrical Connection
Steps for making the electrical connection to the heat generator.
EMC Safety Measures
Measures for electromagnetic compatibility and electrical installation safety.
Technical Information
Boiler Description
Overview of the UltraGasĀ® boiler's design, features, and components.
Technical Data
Detailed technical specifications, output levels, and efficiency data.
Boiler Dimensions
Diagrams and measurements for boiler size and connection points.
Space Requirements
Minimum clearances required for boiler installation and service access.
Boiler Flow Resistance
Information on water flow resistance characteristics.
Automatic Firing Device
Description of the automatic firing device and its integrated properties.
Commissioning and Startup
Initial Startup Safety
Safety precautions and initial checks before starting the system.
Filling the Heating System
Procedure for filling the heating system with water.
Water Quality
Standards and guidelines for heating water quality and filling.
Gas Inlet Pressure
Setting and checking gas inlet pressure requirements.
Combustion Cylinder Pressure Monitoring
Functional check of the pressure monitoring device and switch settings.
Gas Quantity Adjustment
Procedure for adjusting gas quantity and measuring flue gas composition.
Gas Type Changeover
Instructions for changing the gas type from natural gas to liquid gas.
Screed Function Activation
Procedure for activating and setting the screed drying function.
Maintenance and Service
Routine Maintenance Safety
Safety precautions for performing maintenance work.
Deaeration and Water Top-up
Procedures for bleeding air from the system and replenishing water.
Fuse Replacement
Instructions for safely replacing fuses in the control unit.
Emission Metering
Information for technicians on emissions measurement and manual operation.
Cleaning the Burner Cylinder
Steps for cleaning the burner cylinder and associated components.
Cleaning the Combustion Chamber
Procedure for cleaning the combustion chamber and external parts.
Ignition/Ionisation Device Service
Instructions for cleaning and adjusting the ignition and ionisation electrodes.
Neutraliser Box Maintenance
Procedure for servicing the neutraliser box and refilling granules.
Condensation Trap Cleaning
Steps for cleaning and checking the condensation trap.
Automatic Firing Device Parameters
List of parameters for the automatic firing device BIC 960.

Table of Contents