Related Manuals for KOBE Brillia INX2930SQBF-500-2
Summarization of Contents
Pre-Installation and Initial Checks
Read Before Installation
Check contents, inspect for damages, and have a qualified professional test the unit before installation.
Handling Problems and Returns
Do not install if damaged, keep packaging, have invoice ready, contact merchant or customer service.
Conditions Voiding Returns
Product installed, knock-out holes punctured, or original packaging/parts missing.
Safety Instructions
General Safety Warnings
Professional installation, avoid damaging utilities, vent to outside, turn off power before servicing.
Grease Fire Safety Precautions
Keep clean, use hood when cooking, use high settings only when necessary, do not leave unattended.
Emergency Procedures and Cautions
Range Top Grease Fire Procedures
Smother flames, do not use water, use extinguisher if qualified, evacuate if necessary.
Gas Leak Procedures
Extinguish flames, do not use appliances, ventilate, call emergency services.
General Cautions
Ventilation use, metal ductwork, follow standards, avoid switch ignition, two-person installation.
Electrical Shock Hazard Warning
Disconnect power before servicing; fluorescent bulbs contain mercury.
Components of Package
Range Hood Box Contents
Lists KOBE Range Hood, warranty card, filters, screws, flapper, and exhaust vent.
Installation - Planning and Preparation
Installation Calculation and Table
Refers to Table 1 for measurements related to installation height and clearances.
Installation Safety Warnings
Wear gloves, be careful with tools, prevent debris from entering the vent opening.
Pre-Installation Checks
Read documents, test unit with temporary power, contact KOBE if issues arise.
Venting Requirements
Use 6" round exhaust, plan a straight, short vent run to the outside for efficiency.
Installation - Mounting and Ductwork
Installation Clearance Guidelines
Recommended minimum clearance is 26", maximum is 30" between cooktop and hood bottom.
Hood Mounting Procedure
Install into cabinet with stud supports, cut opening, slide hood, secure with screws.
Ductwork Connection
Attach exhaust vent adapter, secure with screws, connect pipe, seal joints.
Installation - Electrical and Final Steps
Electrical Wiring Connection
Connect range hood to outlet or hardwire, matching wire colors.
Final Checks and Testing
Remove protective film, ensure filters are installed, test the range hood's operation.
Grounding and Electrical Safety
Ensure proper grounding by a qualified electrician, following all codes. Switch off power before connecting wires.
Operating Instructions
Control Panel Overview
Explains the 'OFF', 'Q', 'L', 'H' speed controls and the Light control button.
Operating the Fan
Press speed buttons (Q, L, H) to select speed; press 'OFF' to stop.
Operating the Lights
Press the Light control button to turn the lights on and off.
Maintenance and Cleaning
Cleaning the Hood Surface
Use mild soap, soft cloth, or stainless steel cleaner. Avoid abrasive cleaners.
Cleaning Baffle Filters and Oil Tunnel
Drain oil, wash with warm soapy water, dry completely. Baffle filters are top rack dishwasher safe.
Cleaning Aluminum Filters
Remove filters, wash with warm soapy water, dry completely.
Warranty Information
Two-Year Limited Parts Warranty
Covers non-consumable parts due to manufacturing defects for two years from purchase.
Warranty Coverage Details
Valid in US/Canada. Limits apply to Hawaii, Alaska, Canada. Excludes remote areas.
Warranty Exclusions
Excludes wear and tear, consumables, abuse, accidents, unauthorized repairs, and cosmetic damage.
Conditions Voiding Warranty
Voided by improper installation, unauthorized repairs, duct alteration, incorrect wiring, misuse, unauthorized dealers.
Need help?
Do you have a question about the Brillia INX2930SQBF-500-2 and is the answer not in the manual?
Questions and answers