Table of Contents
Advertisement
9.
For the path to the OEM SCSI Adapter files,
should be displayed. Select Continue. Then remove the floppy disk
from your A: drive.
10. The System Settings Change message displays: "You must restart
your computer before the new settings take effect. Do you want to
restart your computer now?" Click on the Yes button to restart and
reboot Windows NT. If you choose Cancel, remember that you must
restart before the new driver loads.
11. Rebooting loads your new miniport driver(s).
5.1.2 Intel
A. Preparing the Intel 82551QM LAN Driver Disk
Windows NT 4.0 does not have the drivers for the Intel 82551QM LAN
controller. Before installing Windows NT 4.0, copy the LAN drivers from
the PR-DLSW support CD into a floppy disk.
Prepare one blank formatted high density floppy disk before
proceeding.
1.
Insert the PR-DLSW support CD into the CD-ROM drive.
2.
Run the
dcreat.exe
\Drivers\LAN\MAKEDISK
3.
Insert the floppy disk into the floppy disk drive when prompted.
4.
Proceed to the next section to install the LAN drivers from the driver
disk that you created.
5-4
®
82551QM LAN Driver Installation
utility from the following path:
A:\WINNT\MINIPORT
Chapter 5: OS Installation
Advertisement
Table of Contents
