Table of Contents
Advertisement
10. Wake-On-LAN Connector (3-pin WOL_CON)
This connector supports a LAN card with a Wake-On-LAN output. The
connector powers up the system when a wakeup packet or signal is
received through the LAN card.
®
PR-DLSW
PR-DLSW Wake-On-LAN Connector
11. Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-On-
Ring output. The connector wakes up the system when a ringup packet
or signal is received through the internal modem card.
For external modems, Wake-On-Ring is detected through the COM
port.
®
PR-DLSW
PR-DLSW Wake-On-Ring Connector
ASUS PR-DLSW motherboard user guide
WOL_CON
Ground
PME
+5 Volt Standby
IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power
WOR
Ring#
Ground
2-23
Advertisement
Table of Contents
