Broadcom Gigabit Lan Driver Installation - Asus NRL-LS533 User Manual

II. Broadcom Gigabit LAN Driver Installation
Installing the Driver Software
1. Verify that the Windows NT system is upgraded with Service Pack
4 or later.
2. Start your Windows NT system and log in. You must have
Network Administrator privileges to install the driver software.
3. Open the Control Panel.
4. In the Control Panel, double-click the Network icon.
5. When the Network window opens, select the Adapters tab.
6. Click Add to install a new adapter. All previously installed drivers
are listed under Network Adapters.
7. When the Select Network Adapter window opens, click Have
Disk....
8. When prompted, insert the ASUS Support CD into your system's CD-
ROM drive, type the path to the driver, and click OK.
For example, to install the adapter driver software for Windows NT,
type e:\Drivers\LAN\Broadcom\in the Insert Disk location box (where
"e:" is the designation of the CD-ROM drive on your system).
NOTE - If you acquired the adapter software on floppy disk or
from the Broadcom support website, enter the path to where the
adapter driver files reside on your system.
With "Gigabit Ethernet Controller" highlighted in the Select OEM
Option window, click OK.
The adapter files are installed, then the Network window is
displayed showing the newly installed adapter.
9. Click Close, then the Microsoft TCP/IP Properties window
appears.
10.Configure the TCP/IP protocol and click OK.
11.When prompted to restart your computer, click Yes.
ASUS NRL-LS533 motherboard user guide 5-7