Table of Contents
Advertisement
2.5.2 Memory Configurations
The motherboard supports system memory of up to 12GB in a two-way
interleaved configuration. As a rule, this configuration requires that you
install identical DDR DIMMs (exactly the same type and size) in pairs. For
example, if you installed a 512MB module into DDRA1, you must install
the same type of 512MB module into DDRB1. The same rule applies to
pairs DDRA2/DDRB2 and DDRA3/DDRB3.
The only exception to the above rule allows you to install one DIMM into
DDRA1 socket (the socket closest to the ATX power connector). Installing
a single DIMM into any other socket would not work.
The following table lists the DIMM socket pairs and the memory modules
that you can install.
Memory configuration table
DIMM Socket
DDRA1
SDRAM 128MB, 256MB, 512MB, 1GB, 2GB
DDRB1
SDRAM 128MB, 256MB, 512MB, 1GB, 2GB
DDRA2
SDRAM 128MB, 256MB, 512MB, 1GB, 2GB
DDRB2
SDRAM 128MB, 256MB, 512MB, 1GB, 2GB
DDRA3
SDRAM 128MB, 256MB, 512MB, 1GB, 2GB
DDRB3
SDRAM 128MB, 256MB, 512MB, 1GB, 2GB
The system chipset only supports PC2100/1600 registered ECC
DIMMs. Make sure to use only the specified DIMM types for stable
system operation.
ASUS PR-DLSW motherboard user guide
184-pin ECC DDR DIMM
Total System Memory (Max. 12GB)
Total Memory
x1
x1
x1
x1
x1
x1
2-9
Advertisement
Table of Contents
