Table of Contents
Advertisement
®
5.7.2 Intel
SCO UnixWare 7.1.1 system can correctly recognize Intel 82551 network
controller during installation. User doesn't need to load or modify the
network driver for the onboard LAN device.
You can find the Intel 82551 Network driver from PR-DLSW support CD at:
\Drivers\Lan\UNIX\UW7DDI8
It is not necessary, nor recommended, to remove previous versions of this
package from the system before installing this updated version. To install
this package, you may use the
desktop, or as a root login with
1.
Copy the
eeE8.pkg
such as in the
2.
Make sure no other users are logged on and all user applications are
closed.
3.
If there is an older version of the
'
' and remove any configured NICs. Exit '
netcfg
old driver by typing '
typing '
pkginfo -l eeE
4.
Install the new driver using 'pkgadd'. For example:
# pkgadd -d /tmp/eeE8.pkg
5.
Run '
' to add and configure the NICs.
netcfg
6.
Reboot the system.
If you require Hot Plug PCI capabilities, the DDI 8 eeE8 driver must be
used. The DDI 8 driver is supported on UnixWare 7.1.0 and later
versions. For more information about Hot Plug PCI capabilities please
refer to SCO UnixWare 7 documentation.
ASUS PR-DLSW motherboard user guide
82551QM LAN Driver Installation
scoadmin
pkgadd
file into any directory on the UnixWare system,
directory.
/tmp
'. (You can find the driver version by
pkgrm eeE
').
Application Installer from the
command.
driver on the system, first run
eeE
netcfg
'. Remove the
5-37
Advertisement
Table of Contents
