Table of Contents
Advertisement
5.
Insert the Red Hat
OK, then press <Enter>.
Insert your driver disk into /dev/fd0
and press "OK" to continue.
The drivers for the RAID card are installed to the system.
6.
When asked if you will load additional RAID controller drivers, select No, then
press <Enter>.
Do you wish to load any more
driver disks?
7.
Follow the screen instructions to continue the OS installation.
3-10
Enterprise RAID driver disk to the floppy disk drive, select
®
Insert Driver Disk
OK
More Driver Disks?
Yes
No
Back
Chapter 3: Driver installation
Advertisement
Table of Contents
