Table of Contents
Advertisement
★ Please read and follow all warnings, precautions and instructions before
installation and use.
★ Coming with UPS01 uninterrupted power supply, this series gate opener can be
powered by AC 100-240V electricity directly. It is allowed to use additional battery
(NOT incl.) and solar panel (optional) as BACK-UP or MAIN power source with this
UPS01.
★ Never connect the solar panel to the control board directly to charge the battery.
★ Periodic checks of the opener are required to ensure safe operation.
★ Save this manual.
C030569
Dual Swing Gate Opener
User's Manual
A3132 / A5132 / A8132
A3132S / A5132S / A8132S
TOPENS Website
www.topens.com
Email: support@topens.com
Model:
VER 21a
Advertisement
Table of Contents
Related Manuals for Topens A5132
Summarization of Contents
Dual Swing Gate Opener Overview
Model Identification
Lists the A3132, A5132, A8132 series models.
Essential Safety Warnings
Key safety precautions before installation and use.
Contact Support Information
Provides website and email for customer support.
Safety Installation Information
General Installation Safety Guidelines
Read and follow all instructions for safe operation and installation.
Gate Clearance and Entrapment Prevention
Ensure proper gate installation and clearance to prevent entrapment risks.
Sensor Placement and Control Accessibility
Guidelines for safety sensors and control placement for user safety.
Warning Placards and Gate Preparation
Instructions for warning signs, gate suitability, and preparation checks.
A3132 Parts Identification
A3132 Actuator and Accessory Components
Lists the main opener components and accessories like remote and power supply for A3132.
A3132 Hardware Components
Details all necessary hardware for A3132 installation, including bolts and washers.
A5132/A8132 Parts Identification
A5132/A8132 Actuator and Accessory Components
Lists main opener components and accessories for A5132/A8132 models.
A5132/A8132 Hardware Components
Details all necessary hardware for A5132/A8132 installation, including bolts and washers.
Optional and Included Accessories
Available Optional Accessories
Lists various optional accessories available for purchase, such as remotes and keypads.
Included System Accessories
Lists accessories that may be included with certain gate opener models.
Replacement Parts and Installation Tools
Gate Opener Replacement Components
Lists spare parts such as control boards, power supplies, and limit switches.
Required Tools for Installation
Lists all essential tools needed for the gate opener installation process.
Key Technical Specifications
Provides key technical specifications like input voltage and motor power for different models.
Technical Specifications and Product Features
Actuator Performance Specifications
Details actuator speed, maximum travel, and operating temperature range.
Gate Capacity and Length Compatibility
Tables showing gate weight and length compatibility for different models.
Core Product Features Overview
Lists important features like soft start, emergency release, and auto-close functions.
Gate Opener Installation Overview
Pull-to-Open Gate Configuration
Illustrates the general setup for a pull-to-open gate configuration.
Push-to-Open Gate Configuration
Illustrates the general setup for a push-to-open gate configuration.
Installation Preparation Steps
Important notes on gate clearance, post types, and mounting preparations.
Pull-to-Open Installation Guide
Post Bracket Mounting Position Guide
Tables and diagrams to determine optimal post bracket mounting for various gate angles.
Post and Pivot Bracket Assembly
Details on assembling and attaching post brackets using specific bolts and nuts.
Pull-to-Open Installation Guide
Connecting Opener to Brackets
Steps for connecting the opener to the brackets using clevis pins and securing them.
Manual Actuator Arm Operation
How to use the release key to manually move the actuator arm.
Temporary Opener Securing Method
Instructions for temporarily fixing the opener using C-clamps before final mounting.
Pull-to-Open Installation Guide
Clearance and Binding Verification
Ensuring 2.5cm clearance and checking for any binding between opener and brackets.
Gate Post and Gate Drilling Procedure
Marking and drilling precise holes on the gate post and gate for bracket attachment.
Pull-to-Open Installation Guide
Attaching Post Bracket Assemblies
Securing post bracket assemblies to the gate post using M10x200 bolts.
Attaching Gate Brackets to Gate
Attaching gate brackets to the gate using M10x75 bolts and lock washers.
Final Clevis Pin Connection (Open Position)
Connecting the opener to brackets with clevis pins when the gate is open.
Push-to-Open Installation Guide
Manual Actuator Retraction (Push-to-Open)
Releasing the motor to retract the arm for push-to-open installation.
Post Bracket Mounting for Push-to-Open
Tables for determining post bracket positions for push-to-open gate angles.
Push-to-Open Installation Guide
Post Bracket & PSO Part Assembly
Assembling post brackets and PSO parts for push-to-open installation.
Connecting Opener to Brackets (Push-to-Open)
Connecting the opener to brackets using clevis pins for push-to-open.
Manual Actuator Extension (Push-to-Open)
Using the release key to manually extend the arm for push-to-open setup.
Temporary Opener Securing (Push-to-Open)
Temporarily fixing the opener with C-clamps in the closed position.
Push-to-Open Installation Guide
Clearance Check for Push-to-Open
Ensuring clearance and checking for binding in the closed position for push-to-open.
Push-to-Open Installation Guide
Drilling and Marking for Push-to-Open
Marking and drilling holes on post and gate for bracket attachment in push-to-open setup.
Attaching Post Brackets (Push-to-Open)
Securing post bracket assemblies using M10x200 bolts for push-to-open.
Attaching Gate Brackets (Push-to-Open)
Attaching gate brackets using M10x75 bolts for push-to-open.
Push-to-Open Installation Guide
Final Clevis Pin Connection (Closed Position)
Connecting opener to brackets with clevis pins when the gate is closed for push-to-open.
Control Box Mounting Procedures
Secure Control Box Installation
Recommendations for securely mounting the control box, considering weatherproofing and accessibility.
CAUTION: Water Drainage Design
Ensure the cable outlet hole faces downwards for water drainage.
Power Supply Connection Guide
AC Power Source Configuration
How to power the system using only AC electricity and connecting the UPS-01.
Control Board Terminal Identification
Diagram showing terminal connections on the control board, including for power and actuators.
Power Supply Connection Guide
AC with Battery Backup Power Mode
Using AC electricity to charge backup batteries, connecting 2x12VDC batteries in series.
Solar Charging for Battery Power Mode
Using batteries as the main power source, charged by a solar panel.
Power Supply Connection Guide
Combined AC and Solar Battery Charging
Using both AC electricity and solar panel to charge batteries simultaneously.
Control Board Wiring Instructions
Actuator Wiring for Master and Slave Gates
Detailed instructions for connecting Actuator 1 (master) and Actuator 2 (slave) to the control board terminals.
Wiring Safety Devices and Locks
Wiring connections for photocells, warning lights, and electric locks.
Control Board Wiring Instructions
UPS-01, Battery, and Solar Panel Wiring
Referencing power supply chapter for connecting UPS-01, batteries, and solar panels.
Photocell System and Push Button Wiring
Detailed wiring for photocell emitter/receiver and push button connections.
Optional Exit Wand and Keypad Wiring
Wiring instructions for optional exit wands and wired keypads.
Remote Control Programming and Operation
Programming Gate Opener Remotes
Step-by-step guide to program remotes to the gate opener system.
Maximum Remote Capacity and Options
Information on maximum remotes and optional external receivers.
Procedure for Erasing Remote Codes
Procedure to erase all previously programmed remote codes for security.
Remote Control Operation
Controlling Multiple Gate Openers with One Remote
How to use a single remote to control multiple TOPENS gate openers or different types.
Wireless Keypad Setup and Configuration
Wireless Keypad Programming and Password
Instructions to program the wireless keypad and set/change the default password.
Limit Switch Adjustment Procedures
Limit Switch A (Factory Preset)
Note that Limit Switch A is pre-set and should not be adjusted.
Adjusting Limit Switch B for Pull-to-Open
How to adjust limit switch B to set the closed position for pull-to-open gates.
Adjusting Limit Switch B for Push-to-Open
How to adjust limit switch B to set the open position for push-to-open gates.
Control Board Configuration Settings
DIP Switch Functionality Explained
Explanation of each DIP switch's function for selecting modes like push/pull, auto-close, and photocell.
Potentiometer Adjustment Guide
Details on using potentiometers to adjust soft stop, auto-close, interval, and stall force.
Control Board Configuration Settings
Potentiometer A: Soft Stop Time Adjustment
Adjusting the soft stop period from 1 to 5 seconds.
Potentiometer B: Auto Close Time Setting
Adjusting the auto close time from 3 to 120 seconds.
Potentiometers C & D: Gate Interval Timing
Adjusting open/close interval times between master and slave gates.
Potentiometer E: Stall Force Adjustment
Adjusting the stall force for the gate opener.
Routine Maintenance and Checks
General Gate Opener Maintenance
Cleaning, lubricating, and checking gate hinges and hardware.
Periodic Inspections and Voltage Verification
Performing regular inspections, checking voltage, and gate force adjustments.
Troubleshooting Guide: LED Status and Solutions
Standby and Running Mode LED Indicators
LED status for standby/running and solutions for connection or battery issues.
Troubleshooting: Gates Not Moving
Solutions for gates not moving, covering binding, stall force, and photo beams.
Troubleshooting Guide: LED Status and Solutions
Troubleshooting: Gate Stops Mid-Operation
Solutions for gates stopping during opening/closing, including entrapment and stall force.
Troubleshooting: Single Gate Arm Malfunction
Diagnosing and resolving issues when one gate arm operates but the other does not.
Troubleshooting: Automatic Opening Issue
Troubleshooting why the gate opens automatically but does not close.
Customer Support and Product Disposal
WEEE Product Disposal Guidelines
Guidelines for proper disposal of the product according to WEEE regulations.
Contacting TOPENS for Feedback and Support
Information on providing feedback and contacting TOPENS for support via website, email, or phone.
Need help?
Do you have a question about the A5132 and is the answer not in the manual?
Questions and answers