Dell DX6000 Hardware Owner's Manual page 96

Hardware owner's manual
Hide thumbs Also See for DX6000:
Table of Contents

Advertisement

CAUTION:
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
NOTE:
Maximum dimensions supported for the USB memory key are 24-mm (.94")
wide, 79-mm (3.11") long, and 8.6-mm (.33") tall.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 83.
3 Locate the USB connector on the control panel. See Figure 3-9.
4 Insert the USB memory key into the USB connector. See Figure 3-9.
Figure 3-9. Removing or Installing a USB Memory Key
1
control panel board
3
USB memory key
5 Close the system. See "Closing the System" on page 83.
6 Reconnect the system to power and restart the system.
96
Installing System Components
Many repairs may only be done by a certified service technician.
1
3
2
2
USB memory key connector

Advertisement

Table of Contents
loading

Table of Contents