Securing the Cord
•
pull the cord through the buttonhole until
the loop disappears into the end of it
•
pull the ends of the cord through to
wrong side of the fabric
•
knot or secure with stitches
Cutting Buttonholes Open
•
using the seam ripper, cut from the ends
towards the middle
•
in order not to cut the ends of short
buttonholes by mistake, place a pin at the
end of the buttonhole for additional
security
Buttonhole Cutter and Block (special
accessory)
•
place the fabric on the wood
•
place the cutter in the center of the
buttonhole
•
press down on the cutter with your hand
or a hammer
031196.50.04_0507_a630_EN
Buttonholes - Important Informaiton
67