Interrupting With the Foot Control
• when the embroidery computer is
embroidering, press the Start-Stop-button
on head frame or tap the foot control
lightly
• the embroidery computer will stop
immediately
Completing the Color
• lower the presser foot again
• press the Start-Stop-button on head frame
or the foot control again
• the embroidery computer embroiders all
the sections in the color activated
• the embroidery computer stops
automatically when complete
Changing Color
• the embroidery computer is automatically
ready to embroider the next color
• change color of the upper thread
accordingly
• embroider with the new color
Cutting Thread Ends After Embroidery
• raise the presser foot
• remove the embroidery hoop from the
embroidery arm
• cut threads close to the motif
• carefully remove any connecting threads
from the embroidered area
• take care that the bobbin thread is not cut
too closely to the stitch plate when
removing the embroidery hoop