The Ibm System X Documentation Cd; Hardware And Software Requirements; Using The Documentation Browser - IBM 419452u - Servers System X3250 M2 Xeon 3.0ghz Installation Manual

Note: This illustration shows a serial-attached SCSI (SAS) hot-swap hard disk drive
model (3.5-inch drives). A Serial ATA (SATA) hot-swap hard disk drive model
(3.5-inch drives), SATA simple-swap hard disk drive model (3.5-inch drives), and a
SAS hot-swap model with 2.5-inch hard disk drives are also available. This
illustration might differ slightly from your hardware.
For a list of supported optional devices for the server, see http://www.ibm.com/
servers/eserver/serverproven/compat/us/.
See the Rack Installation Instructions document for complete rack installation and
removal instructions.

The IBM System x Documentation CD

The IBM System x Documentation CD contains documentation for the server in
Portable Document Format (PDF) and includes the IBM Documentation Browser to
help you find information quickly.

Hardware and software requirements

The IBM System x Documentation CD requires the following minimum hardware
and software:
v Microsoft Windows XP, Windows 2000, or Red Hat Linux
v 100 MHz microprocessor
v 32 MB of RAM
v Adobe

Using the Documentation Browser

Use the Documentation Browser to browse the contents of the CD, read brief
descriptions of the documents, and view documents, using Adobe Acrobat Reader
or xpdf. The Documentation Browser automatically detects the regional settings in
your server and displays the documents in the language for that region (if
available). If a document is not available in the language for that region, the
English-language version is displayed.
Use one of the following procedures to start the Documentation Browser:
2
IBM System x3250 M2 Types 4190 and 4194: Installation Guide
ID label
® ®
Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating
systems