Cisco AS5400HPX Installation Manual page 68

Replacing the Chassis Cover
Hold the chassis cover over the chassis bottom, and align each of the cover tabs with the chassis tabs at
Step 2
the top rear of the chassis, as shown in
Figure A-11 Replacing the Chassis Cover
Lower the front of the top cover to close the chassis, and ensure the following:
Step 3
The chassis cover tabs fit under the edge of the chassis rear panel so that they are not exposed.
•
The chassis tabs fit under the chassis cover so that they are not exposed. (See
•
Figure A-12 Cisco AS5400 Chassis
Secure the chassis cover with four screws.
Step 4
Reinstall the chassis on a rack, desktop, or table.
Step 5
Reinstall all interface cables.
Step 6
Cisco AS5400 Universal Gateway Chassis Installation Guide
A-14
Cover
tabs
Cover
4
Front panel
Appendix A
Figure A-11.
Chassis
tabs
Chassis bottom
Replacing Memory Components
Figure A-12.)
OL-2847-02 0A