Index Search; Tracking/V. Lock Adjustment - JVC SR-L910UA - 24 Hour Time Lapse Vcr Instructions Manual

8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

8-4 Index Search

Searching the index code (VISS signal) recorded at the
start of alarm recording helps you quickly locate alarm
recordings (index search function).
• To use the index search function, set the function menu
switch [INDEX SEARCH] to ON.
(SHARPNESS)
(AUTO REC)
(REC CHECK)
(TAPE END MODE)
INDEX
(INDEX SEARCH)
SEARCH (CAMERA SW)
(TAPE END BUZZER)
(WARNING BUZZER)
PRESS (SHIFT, SET)
PRESS (MENU)
VTR mode 1 setting screen

8-5 Tracking/V. Lock Adjustment

When noise appears in the picture in the Play/
Field Advance Play mode
Tracking can only be adjusted in the following modes:
• VHS Standard Play or Extended Play.
• Field Advance Playback with the [PAUSE/STILL]
button
Press the [TRACKING +/-] button to reduce noise.
To restore the tracking preset mode, press the + and -
buttons simultaneously.
*Tracking adustment cannot be performed in the
L12H/L24H Timelapse Play mode.
42
VTR MODE 1
NORMAL
OFF
MANUAL
STOP
Set to
ON
OFF ON
OFF
OFF
TO END
5 When reverse shuttle search or fast-forward shuttle
search is executed, the Index Search mode is engaged.
When an index code is located, playback starts
automatically.
To engage the Reverse Shuttle Search mode or the
Fast-Forward Shuttle Search mode, press the
[REW] or [FF] button once during playback.
5 When an index code is searched in the Fast-Forward
mode or the Rewind mode, the Stop mode is
automatically engaged when the code is located.
• The VISS indicator is shown on the display whenever
the Index Search mode is engaged.
Index Search does not function in the Auto Rewind
mode.
[TRACKING +/-] button
[V. LOCK +/-] button
When the picture moves up and down in the
Still mode
Press the [V. LOCK +/-] button to minimize vertical jitter.