Timer Recording - JVC SR-L910UA - 24 Hour Time Lapse Vcr Instructions Manual

7 RECORDING

7-3 Timer Recording

Two types of timer recording are available: daily timer (by specifying the date) and weekly timer (by specifying the day of the
• Daily timer : Set the date to any date within one year of the current date. Up to 8 programs can be set.
• Weekly timer : Set the day of the week. Recording will automatically be performed on that day each week.
You can program the timer using the on-screen menu display.
Note:
• Timer programming is not possible if the date and time have not been set.
Preparation
• Make sure all necessary equipment is properly connected to the input/output connectors on the rear panel.
• Check the current time.
• Load a cassette with the safety tab in place. If the power is off, loading the cassette automatically turns the VCR on
(auto power on function).
Main menu screen
MAIN MENU
PROGRAM TIMER
FUNCTION
ALARM IN
POWER LOSS
HOUR METER
CLOCK ADJUST
PRESS (SHIFT, SET)
PRESS (MENU) TO
Daily timer program setting screen
PROGRAM TIMER
( DAILY) S T A R T E N D
1. – – – – – – – : – – – – : – – – – H
2. – – – – – – – : – – – – : – – – – H
3. – – – – – – – : – – – – : – – – – H
4. – – – – – – – : – – – – : – – – – H
5. – – – – – – – : – – – – : – – – – H
6. – – – – – – – : – – – – : – – – – H
7. – – – – – – – : – – – – : – – – – H
8. – – – – – – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU) TO
Weekly timer program setting screen
PROGRAM TIMER
(WEEKLY) S T A R T E N D
( MON ) – – : – – – – : – – – – H
( T U E ) – – : – – – – : – – – – H
( WED ) – – : – – – – : – – – – H
( T H U ) – – : – – – – : – – – – H
( F R I ) – – : – – – – : – – – – H
( S AT ) – – : – – – – : – – – – H
( SUN ) – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU) TO
28
week).
[OPERATE] button
Setting the daily timer
1
2
3
END
MODE
END
MODE
END
[SHIFT–] button
[MENU] button
COUNT/ SHIFT/TRACKING
CLOCK MENU
TIME TIMER
MODE REC
[TIMER REC] button
[SET–] button
Turn on this unit and the monitor and engage the Stop mode.
Press the [MENU] button.
[ The main menu screen is displayed on the monitor.
Press the [SHIFT +] or [SHIFT -] button to move the cursor arrow to
<PROGRAM TIMER> in the main menu, then press the [SET +] or [SET -]
button.
[ The daily timer program setting screen is displayed.
• <DAILY> is shown on the second line of the daily timer program setting
screen.
• If the date and time have not been set, the date and time setting
screen will be shown. Once the correct date and time have been set,
repeat steps 2 and 3.
When the weekly timer program setting screen is displayed,
<WEEKLY> is shown on the second line.
• Press the [SHIFT +] or [SHIFT -] button to set the cursor arrow to
<WEEKLY> and press the [SET +/-] or [SET -] button.
[ The cancel program setting screen is displayed.
When the cancel program setting screen is displayed, <CANCEL> is
shown on the second line.
• Press the [SHIFT +] or [SHIFT -] button to set the cursor arrow to
<CANCEL> and press the [SET +/-] or [SET -] button.
[ The daily timer program setting screen is displayed.
[SHIFT+] button
RESET
/CANCEL
SET/V.LOCK AL/PL
RESET
[SET+] button