JVC SR-L910UA - 24 Hour Time Lapse Vcr Instructions Manual page 30

7 RECORDING
7-3 Timer Recording
Daily timer program setting screen
PROGRAM TIMER
( DAILY) S T A R T E N D
1. – – – – – – – : – – – – : – – – – H
2. – – – – – – – : – – – – : – – – – H
3. – – – – – – – : – – – – : – – – – H
4. – – – – – – – : – – – – : – – – – H
5. – – – – – – – : – – – – : – – – – H
6. – – – – – – – : – – – – : – – – – H
7. – – – – – – – : – – – – : – – – – H
8. – – – – – – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU)
• Set the cursor arrow to the second
line <DAILY> and press the [SET +/-
] button.
Weekly timer program setting screen
Start time (minute)
Start time (hour)
PROGRAM TIMER
(WEEKLY) S T A R T E N D
( MON ) – – : – – – – : – – – – H
( T U E ) – – : – – – – : – – – – H
( WED ) – – : – – – – : – – – – H
Days of the
( T H U ) – – : – – – – : – – – – H
( F R I ) – – : – – – – : – – – – H
week
( SA T ) – – : – – – – : – – – – H
(Monday to
( SUN ) – – : – – – – : – – – – H
Sunday)
PRESS (SHIFT, SET, RESET)
PRESS (MENU)
Blinking
2 3
,
PROGRAM TIMER
(WEEKLY) S T A R T E N D
( MON ) – – : – – – – : – – – – H
( TU E ) – – : – – – – : – – – – H
( WED ) – – : – – – – : – – – – H
( TH U ) – – : – – – – : – – – – H
( F R I ) – – : – – – – : – – – – H
( SAT ) – – : – – – – : – – – – H
( SUN ) – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU)
4 5
,
PROGRAM TIMER
(WEEKLY) S T A R T E N D
( MON ) – – 8 : 3 0 1 9 : 3 0
( TU E ) – – : – – – – : – – – – H
( WED ) – – : – – – – : – – – – H
( TH U ) – – : – – – – : – – – – H
( F R I ) – – : – – – – : – – – – H
( SAT ) – – : – – – – : – – – – H
( SUN ) – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU)
6
PROGRAM TIMER
(WEEKLY) S T A R T E N D
( MON ) – – 8 : 3 0 1 9 : 3 0
( TU E ) – – 8 : 3 0 1 9 : 3 0
( WED ) – – 8 : 3 0 1 7 : 3 0 2 4 H
( TH U ) – – 8 : 3 0 1 9 : 3 0 1 2 H
( F R I ) – – 8 : 3 0 2 2 : 3 0 2 4 H
( SAT ) 1 0 : 0 0 2 2 : 0 0 2 4 H
( SUN ) – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU)
Timer
TIMER
1 6 . 3 0 . 0 0
VCR's display
30
MODE
TO END
Stop time (hour)
Stop time (minute)
Record mode
MODE
TO END
MODE
TO END
MODE
6 H
TO END
MODE
6 H
6 H
TO END
Setting the weekly timer
You can program the VCR to record on a specified day
each week.
Using the same procedure as in daily timer program
setting, select <PROGRAM TIMER> in the main menu to
display the timer program setting screen on the monitor.
(Refer to steps 1 to 3 in daily timer programming.)
• When the timer program setting screen is displayed,
the daily timer program setting screen is shown first.
1
Display the weekly timer program setting screen.
(<WEEKLY> is shown on the second line.)
Press the [SHIFT +] or [SHIFT -] button to move the
cursor arrow to <DAILY> and press the [SET +] or
[SET -] button.
[ The weekly timer program setting screen is shown.
2
Select the day of the week you want to record on.
Press the [SHIFT +] or [SHIFT -] button to set the cursor
arrow to the day of the week to be set.
• Press the [SHIFT +] button to move the cursor arrow
down and the [SHIFT -] button to move it up.
3
Set the selected day of the week.
Press the [SET +] or [SET -] button.
[ The selected day of the week blinks.
• Press the [SET +] button. The start time (hour) blinks.
• Press the [SET -] button. The record mode blinks.
4
Set the timer.
1 Press the [SHIFT +] or [SHIFT -] button until the item
you want to set starts blinking.
• Press the [SHIFT +] button to shift the blinking to
the right.
"Start time (hour)"
[
"Stop time (hour)" [
"Record mode"
[
• Press the [SHIFT -] button to move the blinking to
the left.
2 Press the [SET +] or [SET -] button to set the value
for the blinking item.
• Press the [SET +] button to increase the value and
the [SHIFT -] button to decrease it.
Set the "Start time (hour)", "Start time (minute)", "Stop
time (hour)", "Stop time (minute)" and "Record mode"
with the [SHIFT +/-] and [SET +/-] buttons.
5
Accessing another day of the week.
• Select the "Record mode" (so that it is blinking) and
press the [SHIFT +] button. Or, select "Start time" (so
that it is blinking) and press the [SHIFT -] button.
[ The blinking part stops blinking. You may now select
another day of the week.
6
To set more than one weekly timer program, repeat
steps 2 to 5.
7
To end timer programming, press the [MENU] button twice.
The normal screen is restored.
[
Press the [TIMER REC] button.
[ The TIMER indication lights in the VCR's display.
Power is switched off automatically and the VCR
enters the Timer Record Standby mode.
"Start time (minute)"
[
"Stop time (minute)" [
Select the day of the week.