Hour Meter Display - JVC SR-9090U - High Resolution 960 Hour Density Instructions Manual

4 ON-SCREEN/MENU SWITCHES
4-3 Date and Time Setting
Summer Time Compensation
• When setting the time, make sure the <SUMMER TIME> item is set to "OFF".
When this unit is shipped, this item is set to "OFF".
During daylight savings time
1
Set the time with a one-hour delay.
2
After setting the time, set the <SUMMER TIME> item to
"ON".
• The set time advances one hour.
3
At the end of the daylight savings time season, set the
<SUMMER TIME> item to "OFF".
• The standard time instead of <SUMMER TIME> is
displayed.
Time setting for 29 seconds or less
When the seconds value is 29 or less, you can reset it to 00 by
pressing the [CNT RESET] button while pressing the [RESET/
CANCEL] button.
• For 30 or more, the seconds value is reset to 00 and the
minutes value is increased by one.
Notes:
• If the power plug has been disconnected from an AC outlet for a long time, make sure the set time is correct before
using the unit. (Clock time may be affected by environmental factors.)
• When the built-in backup battery capacity is low, the error indication E-10 appears on the display. Contact your local
JVC dealer to replace the built-in battery.

4-4 Hour Meter Display

Drum rotation time is displayed on the monitor's screen and the VCR's display in the form of an hour meter. Use this data to
schedule maintenance.
Main menu screen
* * * * * * * * * [ M E N U ] * *
* * * C L O C K * S E T * * * * *
* * * O N S C R E E N / F . D I S P
* * * V I D E O / V T R * M O D E
* * * S R I / E X T * M O D E * *
* * * A L A R M / S E N S O R * M O
* * * B U Z Z E R / I N * O U T *
* * * P R O G R A M * T I M E R *
* * * H O L I D A Y * S E T * * *
* * * H O U R M E T E R * * * *
* * * O T H E R * M * * * * * *
* 4 F I N * E N U * * *
[SET +/–] button
Hour meter screen
* * * * * * [ H O U R * M E T E R
* * * * * * * * * * * * * * * * *
D R U M * O N * * * * * * * * * *
* * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * *
4
* F I N * E N U * * *
20
VCR's display
* * * * * * *
* * * * * * *
* M O D E *
* * * * * * *
* * * * * * *
D E * * O N
HOUR
* * * * * O N
* * * * * * *
* * * * * * *
* * * * * O N
* * * * * O N
* * * * * * *
] * * * * * *
* * * * * * *
0 0 0 0 4 7 H
*
* * * * * *
* * * * * * *
* * * * * * *
* * * * * * *
* * * * * * *
* * * * * * *
* * * * O F F
* * * * * ** *
* * * * * * *
Standard time
1
Set the clock to the actual time.
2
When daylight savings start, set the <SUMMER TIME>
item to "ON".
• The time advances one hour on the display.
Operation
1
Turn on the VCR and monitor.
2
Press the [MENU] button to display the main menu.
3
Press the [SHIFT 7] button to set the cursor on the
<HOUR METER> on the main menu.
4
Press the [SET +/–] button to show the hour meter (drum
rotating time) on the monitor.
5
Press the [MENU] button twice to restore the normal
screen.