System Using Sequential Switcher - JVC SR-9090U - High Resolution 960 Hour Density Instructions Manual

3 CONNECTIONS

3-2 System Using Sequential Switcher

Video camera
CCD
CCD
CCD
CCD
CCD
CCD
1
Connect video cameras and alarm sensor to a sequential switcher (frame switcher).
2
Connect the sequential switcher's (frame switcher) alarm signal output, camera switching signal input and video output to
the SR-9090U.
3
Connect the monitor's video/audio input connectors to the SR-9090U's video/audio output connectors.
4
When the connection is complete, connect the power plug to an AC 120 V, 50/60 Hz outlet.
5
Synchro should be applied to all connected video cameras.
6
If you are connecting the camera switching signal input from a sequential switcher (frame switcher) to the SR-9090U, be
sure to set the <CAMERA SW> menu switch.
1 2 3 4
Alarm signal output
Video output
RCA BNC
R S - 2 3 2 C
VIDEO
AUDIO
IN
REMOTE MIC
OUT
RCA BNC
4pin
Monitor TV
5 6
Alarm sensor input
1 2 3 4 5 6
Sequential switcher
Camera switching
signal input
Amplifier
AC~IN
AC120V~50/60Hz
Y/C
CAM SW ALARM ALARM COM CLOCK SERIES
REC OUT RESET IN REC IN
OUT IN
ALARM TAPE WARNING CLOCK SERIES
COM
RESET END OUT OUT RESET OUT REC OUT
ALARM IN
CAM SW
OUT
Alarm sensor
Microphone
Provided
power cord
AC 120 V
50/60 Hz
15