Advertisement
VCC-6584
Main Features
• 1/3-inch CCD image sensor with approx. 410,000 picture elements.
• Super high horizontal resolution of 520 TV lines for maximum detail
and a noticeably sharper, clearer picture.
• High sensitivity for monitoring at a minimum required illumination of
0.5 lx with F1.2 lens at high gain.
• Built-in DSP (digital signal processing) circuitry delivers superior
color reproduction and reduced noise.
• Two types of backlight compensation selectable.
Multi-spot photometry system:
Luminance is measured in 64 separate areas for optimum backlight compen-
sation even for peripheral and moving objects; features selectable normal
and high modes.
Multi-spot photometry
Center-zone photometry system:
Luminance measured at center and automatic lens aperture adjustment
enable a clear image even when backlit.
Other Features
• Auto-tracing or manual white balance selectable.
• Electronic iris for indoor use with manual or fixed iris lens.
• Runs on 24V AC or 12 to 15V DC power sources.
520 TVL Cameras for Greater Peace of Mind
VCC-6594/5984
1/3" Color CCD DSP
High-sensitivity/
resolution Camera
VCC-4594
1/3" Color CCD DSP
High-resolution
Day/Night Camera
VCC-9400
1/4" Color CCD DSP
High-resolution Day/Night
Speed Dome Camera
VCC-9300
1/4" Color CCD DSP
High-resolution
Speed Dome Camera
VCC-ZM400
1/4" Color CCD DSP
High-resolution Day/Night
AF Zoom Camera
VCC-ZM300
1/4" Color CCD DSP
High-resolution
AF Zoom Camera
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
Distributed by:
Day
Day
VDC-D1184VA
Night
Night
1/4" Color CCD DSP High-resolution
Day/Night Vandal Proof Dome Camera
Day
Night
Day
VDC-D2184VA
Night
1/4" Color CCD DSP High-resolution
Day/Night Vandal Proof Dome Camera
Day
Night
VCC-XV400
Day
1/4" Color CCD DSP
Night
High-resolution Weatherproof
Day/Night Camera
DI Solutions Company of Sanyo Electric Co., Ltd.
obtained Quality Management System ISO9001
and Environmental Management System ISO14001
certifications.
Specifications
Model No.
Scanning system
NTSC Standard 525 Lines, 30 frames/sec.
Image sensor
1/3" (approx. 4.8 x 3.6 mm) interline transfer method CCD
Effective picture elements
768 (H) x 494 (V)
Resolution
520 TV lines (horizontal), 350 TV lines (vertical)
Minimum illumination
0.5 lx (GAIN HI) / 1.0 lx (GAIN NORM) at F1.2
Video output level
1.0 V (p-p) / 75 ohms, composite
Video S/N ratio
More than 50 dB (AGC off)
Backlight compensation
ON / OFF — Slide SW (side)
ON = Multi-spot photometry (64-section) / Center-zone photometry system
— Slide SW (side) (activated when auto iris lens used)
White balance
Auto / Manual — Slide SW (side)
Gain control
Normal / High — Slide SW (side)
Light control
Auto iris / Electronic iris
Lens mount
CS mount (top/bottom selectable)
12.5 mm ±0.5 mm adjustment
Flange back
Auto iris lens
DC type
Auto iris output
DC: Drive coil (+, –), Blake (Damp) coil (+, –)
Lens iris level
LEVEL: L to H — VR (side)
Electronic iris
ON (EI) / OFF (AI) — Slide SW (side)
Electronic iris range
1.0 to 50,000 lx (with F1.2 lens)
Synchronizing system
Internal sync / Line lock — Slide SW (side)
V phase adjustment
LINE PHASE — VR (rear)
Sockets
Video signal
VIDEO OUT — BNC (rear)
Auto iris lens
LENS — 4-pin (side)
Power supply
24 V AC, GND — 3-pin terminal (rear)
12 to 15 V DC, GND — 2-pin terminal (rear)
Operating
Operating
Temperature: –10˚C to 50˚C [14˚F to 122˚F], Humidity: within 90% RH
conditions
Storage
Temperature: –20˚C to 70˚C [–4˚F to 158˚F], Humidity: within 70% RH
Power requirement
24 V AC, 60 Hz / 12 to 15 V DC
Power consumption (approx.)
3.6 W
Camera mount
1/4" – 20 UNC (top/bottom selectable)
Dimensions (approx.)
56 (W) x 45 (H) x 99 (D) mm
[2.21 (W) x 1.77 (H) x 3.9 (D) in.] (excluding protrusions)
Weight (approx.)
280 g [9.88 oz] (without lens)
Dimensions
56 (2.21)
LENS
LENS 4-pin
28 (1.10)
VIDEO OUT
~ ~
+
Rear panel
SANYO Electric Co., Ltd.
www.sanyosecurity.com
©2004 SANYO Printed in Japan '04.6.MA.
SMS000
VCC-6584
NOTE: Specifications subject to change without notice.
[Unit: mm (inch)]
108 (4.25)
1.4
99 (3.90)
(0.06)
COLOR CCD CAMERA
16
(0.63)
10.7
(0.42)
25.8
1/4"–20UNC
(10.20)
threaded hole
POWER
(top / bottom selectable)
GND AC24V
CLASS 2
WIRING
-
DC12V
9
(0.35)
Advertisement
