Installation And Setup; Before Starting Installation And Setup; Names Of Vn-C1U Parts - JVC VN-C1U - Digital Ethernet Color Camera Instructions Manual

Installation and Setup

Before starting installation and setup

Since a setup of one IP address is necessary for each VN-C1U, follow the procedure given below to
setup each unit (the installation can be made at the same time if the power is left off.
1. Install VN-C1U
When installing in a location where it is difficult to turn the power on and off, install after
completing steps 2 through 5.
2. Connect VN-C1U to a network
(turn the power of VN-C1U on)
3. Set the IP address of VN-C1U
Always contact the network management for the IP address of VN-C1U and use only that which
is assigned or authorized.For setup of a second unit and following, reboot the PC and return to
step 2.
4. Enable the set IP address of VN-C1U
(Turn the power of VN-C1U off once, then turn the power back on)
5. Register the connecting point
Register the IP address information of VN-C1U to the user PC.

Names of VN-C1U parts

Lens block
Lens cover
Front
3
Rear Top
DC input jack
10BASE-T port