Vn-C3Wu Installation And Setup; Before Starting Installation And Setup; Names Of Vn-C3Wu Parts - JVC VN-C3WU - Digital Web Color Camera Instructions Manual

VN-C3WU Installation and Setup

Before starting installation and setup

It is necessary to set an IP address for each VN-C3WU unit. Use the following procedure for the
setup of individual units. (If the power is not turned on, the installation operation can be performed
at one time.)
1. Install the VN-C3WU.
Only in cases of installation in a location where the power cannot easily be turned on,
complete steps 2 to 4 before installing.
2. Connect the VN-C3WU to a network.
(With the VN-C3WU power turned on.)
3. Set the VN-C3WU IP address.
When setting the VN-C3WU IP address, be sure to contact the network manager for
assignment or approval.
4. Alarm IN/OUT connection.
5. VN-C3WU access test.
This test is performed after any change to confirm the IP address.

Names of VN-C3WU parts

Rear view
10BASE-T 10BASE-T
DC12V DC12V
DC IN jack
10BASE-T port
Side view
Lens unit
Body
Alarm IN/OUT jack
Front view
Lens cover
11