JVC VN-C1U - Digital Ethernet Color Camera Instructions Manual page 16

5. Registering the connection point
Start up the VN-C1U controller (VN-C1U connection software: vn-c1u.exe).
Execute [New] from the [File] menu to set the connection point.
To make correction after completing registration, first delete all settings then re-register.
Advice
To copy connection point settings to another PC
The VN-C1U connection point information is created as a dat file (extension: .dat) in the
folder where the connection software was installed.
Connection point information can easily be copied to another PC by copying the dat file.
11
Enter the VN-C1U IP address of the
connection point and the setting name
(the illustration shows an example using
172. 16. 1. 50).