Function Settings With V.networks Controller - JVC VN-C10U - Network Camera User Manual

Operations (Step 4 Setting with V.Networks Controller)

Function Settings with V.Networks Controller

With [V.Networks Controller], settings for image size, alarm etc. can be performed.
1 2 3 4
1
File
New
Delete
Motion Detect Standby
Exit
2
View
Image Size
Upside Down
26
: Creates a new file if
the camera is con-
nected for the first
time.
: Deletes a file.
: For selecting the
camera for which
motion detection is
enabled.
: Exits "Controller."
: Sets the image dis-
play size.
JPEG : 640x480
320x240
160x120
MPEG4 : 320x240
160x120
: Displays the image
inversely. This func-
tion is used in the
case that the camera
is inversely installed.
(Not available for
MPEG4)
3
Setting
Quality
Framerate
Alarm Reg
Alarm
Time Stamp
Property
4
Help
About
: Sets the compression
rate and image qual-
ity.
: Sets the number of
frames transmitted
per second.
: If this is selected
alarm operation will
be enabled.
: Alarm actions for
each alarm can be
set individually.
: Sets display of the
date and time of file
saving.
: Changes information
on cameras not cur-
rently connected.
: For checking the ver-
sion of [V.Networks
Controller].
,