Table of Contents
Advertisement
Network Settings
IP Address Settings
Setting IP address with the default VN-
C20 settings
There are 2 methods to set the IP address when
VN-C20 is in its default settings.
(A) Assigning an IP address to VN-C20 from
the DHCP server
(B) Assigning a static IP address to VN-C20
(A) Assigning an IP address from the
DHCP server
● VN-C20 is set to DHCP Enable (the DHCP
client function is ON) by default. To assign an
IP address from DHCP server, connect VN-
C20 to LAN with DHCP server, and turn on
VN-C20. Allowing the DHCP server to assign
the same IP address to VN-C20 every time
eases access toVN-C20.
● For details on IP addresses assigned to VN-
C20, please consult your network
administrator.
● You can look up the IP address of VN-C20
using the search tool in the attached CD-
ROM. For details, please refer to the
Readme file in the attached CD-ROM.
Caution:
● Set the DHCP server such that the IP
address assigned to MAC address of VN-
C20 from the DHCP server is the same each
time.Connection may fail if the above setting
is not performed.
(B) Assigning a static IP address
System configuration required for setting
IP address
VN-C20 is set to DHCP Enable (the DHCP
client function is ON) by default. Upon starting
up in LAN without DHCP server,VN-C20 starts
running with the following IP address after time
out of DHCP.
IP address
: 192.168.0.2
Subnet mask
: 255.255.255.0
Default gateway
: None
Note:
● To set a static IP address for VN-C20,
connect VN-C20, switching hub and
computer for setting using a straight LAN
cable of Category 5 and above.
Set up the computer for setting the IP
address.
● Minimum computer specifications for setting
OS
: Windows XP (Professional or
Home Edition) (SP2)
Web browser : Internet Explorer V6.0
Caution:
● When setting the IP address for VN-C20, do
so by using a network that is made up only of
VN-C20, the computer for setting and the
switching hub.
● Using a hub connected to other network
devices can cause problems.
21
Advertisement
Table of Contents
