Setting The Pc's Ip Address For Windows Xp - JVC VN-C10U - Network Camera User Manual

Setting the PC's IP Address for Windows XP

After attaching the camera, proceed to set the IP address of the PC by which the
camera is operated.
With Windows XP, follow the procedure below to set the IP address.
(For Windows 2000,
Note
Under a DHCP environment and also if the IP address to be allotted to [V.Networks] is already
known, skip Setting the PC's IP Address.
1.
Click .
• Right-click [My Network] and select [Properties].
2.
Select the network connected to the PC by which VN-C10 is operated.
• Right-click to select [Properties].
☞
Page 19)
Ensure that [Client for Microsoft Networks]
is selected .
Note
If either [Client for Microsoft Networks]
or [Internet Protocol (TCP/IP)] is not
displayed, select [Install ...].
17