Table of Contents
Advertisement
Quick Links
TRANSLATION OF THE ORIGINAL VERSION
Operating Manual
Bandsaw Machines
PANHANS BSB 400 / 500 / 600 / 700 / 800 / 900
Bandsaw Machine Series BSB 400 - 900
Machine Type:
HOKUBEMA Maschinenbau GmbH
Graf-Stauffenberg-Kaserne, Binger Str. 28 | Halle 120
DE 72488 Sigmaringen | Tel. +49 07571 755-0
E-Mail:
info@hokubema-panhans.de
| Web:
https://hokubema-panhans.de
Advertisement
Table of Contents
Troubleshooting
Related Manuals for PANHANS BSB 600
Summarization of Contents
1 Introduction
1.1 Legal Notice
Details the copyright and usage rights for the operating manual.
1.2 Illustrations
States that figures and graphics are for illustration and may differ from the product.
2 Symbols
2.1 General Symbols
Explains general symbols used in the manual for emphasis or reference.
2.2 Symbols in Safety Instructions
Details various safety symbols and their meanings related to hazards and precautions.
3 General
3.1 Structure of the Machine
Describes the main components and functional elements of the bandsaw machine.
3.2 Target Group and Previous Experience
Defines the intended users and required knowledge for operating the machine.
3.3 Requirements for the Operators
Specifies qualifications and responsibilities for personnel operating or maintaining the machine.
3.4 Accident Prevention
Outlines rules to prevent accidents during machine operation.
3.5 General Safety Regulations
Lists general safety rules and obligations applicable when handling the bandsaw machine.
3.6 Machine Description
Provides a general description of the bandsaw machine's capabilities and operation.
3.7 About the BSB 400 - 900 Series
Discusses the different versions within the BSB 400-900 series and their adaptability.
3.8 Standard Equipment
Details the standard features and components included with the machine.
3.9 Available Accessories
Informs users about optional components and where to find them.
4 Safety
4.1 Basic Safety Instructions
Provides fundamental safety guidelines and warnings for machine operation.
4.2 Safety Instructions for Specific Phases of Operation
Details safety measures for different stages of machine use, including startup and operation.
4.3 Danger Zones on the Bandsaw
Identifies hazardous areas around the bandsaw blade and machine.
5 Machine Data
5.1 Series and Expandability
Discusses machine series variations and the possibility of adding accessories.
5.2 Technical Specifications
Lists detailed technical data, dimensions, and specifications for the bandsaw models.
5.3 Dimensions
Provides height, length, and width dimensions for each model, plus space requirements.
5.4 Emission Levels according to EN ISO 3746:2010
Details noise and dust emission levels measured at the workplace.
6 Installation and Connection
6.1 Check Delivery Conditions
Instructs users on inspecting the machine for completeness and transport damage.
6.2 Transport to the Installation Site
Provides guidelines for safely transporting the machine to its installation location.
6.3 Pre-Assembly
Details any pre-assembly steps required for specific machine models before installation.
6.4 Installing the Machine
Explains how to properly install the machine on the floor, including leveling.
6.5 Temporary Storage
Provides instructions for storing the machine if it is not put into operation immediately.
6.6 Lashing on a Transport Vehicle
Details methods for securely lashing the machine onto a transport vehicle.
6.7 Connecting the Extraction Unit
Explains how to connect the machine to an effective extraction system.
6.8 Electrical Connections
Provides instructions for electrical connection, emphasizing authorized electrician use.
8 Commissioning
8.1 Switching ON and OFF
Describes the procedures for switching the machine on and off for different models.
8.2 Frequent switching ON and OFF in succession
Warns against frequent switching cycles due to potential damage to the machine.
9 Settings and Operation
9.1 Basic Factory Setting
Explains that the machine is factory-adjusted and warns against manipulating settings.
9.2 Door Interlock with Safety Switches
Details how the safety switches on the doors function to prevent operation.
9.3 Inserting and Tensioning a Bandsaw Blade
Provides step-by-step instructions for installing and tensioning the bandsaw blade.
9.4 Adjusting the upper Bandsaw Wheel
Explains how to adjust the upper bandsaw wheel for proper blade tracking.
9.5 Height adjustment of the upper Saw Blade Guide
Describes how to set the height of the upper saw blade guide relative to the workpiece.
9.6 Swivel Table
Details how to adjust the table's inclination angle.
9.7 APA 2 - Saw Blade Guides
Covers the structure, adjustment, and troubleshooting of the APA 2 saw blade guides.
10 Using the Rip Fence
10.1 Convert the Fence to the Right of the Saw Blade
Explains the mechanical conversion needed to use the fence on the right side of the blade.
12 General Instructions for Use
12.1 Bandsaw Blades
Provides guidelines for handling, storing, and selecting bandsaw blades.
12.2 Use of the Machine
Details safe operating practices, workpiece handling, and danger zone awareness.
12.3 Completion of the Work
Describes procedures for finishing work, including blade tension release and guard adjustment.
13 Optional Components
13.1 Variable Sawblade Speed Control
Explains the optional variable speed control for adjusting blade speed.
13.2 Measurement Scale on the Table
Describes the optional table scale for precise dimensioning of cuts.
13.3 Table Swivel Device
Details the optional device for easily adjusting the table's inclination angle.
13.4 Mitre Fence “Top”
Describes the mitre fence for sawing angles and mitres, including its adjustability.
13.5 Table Extension
Explains the optional table extension for supporting large or long workpieces.
13.6 Kreisfix for Circular Cuts
Details the Kreisfix accessory for precise circular cuts and arcs.
13.7 Machine Moving Trolley
Describes the optional trolley for making the bandsaw mobile.
13.8 Laser Cut Position Indicator (Option for BSB 600 - 900)
Explains the optional laser for projecting the cutting edge onto the workpiece.
15 Maintenance and Inspection
15.1 Replace Ball Bearings
Provides instructions for replacing noisy or worn ball bearings.
15.2 Lubrication of the Machine
States that the machine itself does not require lubrication.
15.3 Maintenance and Lubrication of the APA Saw Blade Guides
Details the maintenance and lubrication schedule for the APA saw blade guides.
15.4 Bandsaw Roll Coating
Discusses the bandsaw roller contact area material and its maintenance.
15.5 Replacing the Bandsaw Blade
Explains when and how to replace the bandsaw blade.
15.6 Retension the V-belt(s)
Provides instructions for adjusting the tension of the V-belts.
15.7 Replacing the V-belt(s)
Details the procedure for replacing the machine's V-belts.
15.8 Readjusting the Main Motor Brake (2.2 - 3.0 kW)
Explains how to readjust the main motor brake for specific models.
15.9 Readjusting the Main Motor Brake (4.0 - 7.5 kW)
States that the main motor brake for these models cannot be readjusted.
15.10 Models with Electric Motor Brake
Notes that electric motor brakes are not adjustable and advises contacting service.
17 Options and Accessories
17.1 BSB 400 - Bandsaw Blades
Lists available bandsaw blade dimensions and part numbers for the BSB 400 model.
17.2 BSB 400 - Options & Accessories
Lists optional accessories and their part numbers for the BSB 400 model.
17.3 BSB 500 - Bandsaw Blades
Lists available bandsaw blade dimensions and part numbers for the BSB 500 model.
17.4 BSB 500 - Options & Accessories
Lists optional accessories and their part numbers for the BSB 500 model.
17.5 BSB 600 - Bandsaw Blades
Lists available bandsaw blade dimensions and part numbers for the BSB 600 model.
17.6 BSB 600 - Options & Accessories
Lists optional accessories and their part numbers for the BSB 600 model.
17.7 BSB 700 - Bandsaw Blades
Lists available bandsaw blade dimensions and part numbers for the BSB 700 model.
17.8 BSB 700 - Options & Accessories
Lists optional accessories and their part numbers for the BSB 700 model.
17.9 BSB 800 - Bandsaw Blades
Lists available bandsaw blade dimensions and part numbers for the BSB 800 model.
17.10 BSB 800 - Options & Accessories
Lists optional accessories and their part numbers for the BSB 800 model.
17.11 BSB 900 - Bandsaw Blades
Lists available bandsaw blade dimensions and part numbers for the BSB 900 model.
17.12 BSB 900 - Options & Accessories
Lists optional accessories and their part numbers for the BSB 900 model.
Need help?
Do you have a question about the BSB 600 and is the answer not in the manual?
Questions and answers