Adjusting The Camera Position - Honeywell HD3C User Manual

Adjusting the Camera Position

Figure 6
While monitoring the video signal:
1. If required, loosen the screw that locks the gimbal assembly in place
(see Figure
2. Adjust the camera carrier to the desired view.
3. Tighten the screws to lock the gimbal assembly in place.
Caution Do not turn the lens more than 360° as this may cause the
internal cables to twist and disconnect or break.
16
Camera Position Adjustment
B
C
A
7).
2
Legend
1 Focus lever (top) sets focus
1
Zoom lever (bottom) sets
2
focal length
A Tilt rotation
B Horizontal rotation
C Pan rotation