4S Electrical Junction Box - Honeywell HD3C User Manual

4S Electrical Junction Box

1. Use the adapter plate to cover ceiling or wall imperfections around the
electrical box opening (see
electrical box using appropriate screws (not supplied).
2. If necessary, tuck the Video/Power and BNC cabling into the notch.
3. Secure the camera base with the three screws, supplied.
Figure 3
Notch to hold
Video/Power/
BNC cabling
Document 800-00788 Rev C
07/08
Figure
4S Electrical Junction Box Installation
3). Secure the adapter plate to the
4S electrical box (not supplied)
Adapter plate
Mounting screws, not supplied
HD3 base
Screws (x3, supplied)
13