Adjusting The Camera Position - Honeywell HD3VC4SHR Quick Install Manual

Adjusting the Camera Position

Figure 4
1. Loosen the Tilt adjustment thumbnuts (see #1 on
Tilt adjustment thumbnut counter-clockwise and one clockwise.
2. Turn the Tilt adjustment bracket (#1) and Axis ring (#2) in the desired
direction, then retighten the thumbnuts.
3. Loosen the Zoom lever (#3) counter-clockwise a little, then rotate the
Zoom lever and determine the image view.
4. Loosen the Focus lever (#4) counter-clockwise a little, then adjust the
focus for optimum picture sharpness.
5. Re-tighten the Zoom lever and Focus lever after adjustment.
6. Repeat step 1
Rev 1.00
Camera Position Adjustment
2
3
4
to step 4 until the desired range and focus are set.
Legend
Tilt adjustment bracket and
1
thumbnuts (x2)
2 Axis ring
1
3 Zoom lever
4 Focus lever
6
Figure 4). Turn one
Document 900.0510
05/06