Table of Contents
Advertisement
Setting the Camera Image Properties
The table below explains the options on the VIEWING menu.
>FLIP
> ID DISPLAY.
CAMERA ID SETUP
CAMERA ID
>
ID POSITION
PREVIOUS PAGE .
>ID POSITION
>SHARPNESS
>BRIGHTNESS
RESOLUTION
Rev 1.01
VIEWING
FLIP
ID DISPLAY
>
SHARPNESS
BRIGHTNESS 110 80
RESOLUTION
COLOR ADJ.
PREVIOUS PAGE .
Select either:
<ON> to reverse the image
horizontally on the video monitor, or
<OFF> (default)
Select ON to open the CAMERA ID
SETUP screen where you can add a
CAMERA ID (title) of up to 8
characters.
UP-LEFT
Move the cursor (>) to CAMERA ID,
then press
appears. Press !, or " to change the
character, then press
the next character.
When you are satisfied, press #, or$
and move the cursor to another item.
Select where you want the Camera ID
to appear on the monitor screen
Select from the list:
<UP-LEFT>, <UP-CENTER>, <UP-
RIGHT>, <DOWN-LEFT>, <DOWN-
RIGHT>
Select the level of sharpness of the
image. Choices are:
<NORMAL> (default)
<SHARP>
<SOFT>
While observing the video monitor,
move the cursor to adjust the overall
brightness level, from 80 to 130 (110
is the default).
Select the camera resolution. Choices
are:
<NORMAL> (default)
<HIGH>
OFF
<OFF>
NORMAL
130
%
NORMAL
0
-8
8
%
. The first character
12
to move to
Document 900.0418
10/06
Advertisement
Table of Contents
