Table of Contents
Advertisement
>COLOR ADJ
Setting the Day/Night Control
The table below explains the options on the DAY/NIGHT
SETUP menu.
>D/N CONTROL
DAY/NIGHT SETUP
>
D/N CONTROL
NIGHT MODE
PREVIOUS PAGE .
>NIGHT MODE
Restoring Settings
On the main MENU, select RESTORE DEFAULTS, then YES
followed by ENTER (middle button). This reloads the factory
default camera settings.
Caution
This action replaces all custom settings.
Rev 1.01
While observing the video monitor,
move the cursor to adjust the color
saturation, from -8 to 8 (0 is the
default).
Select either:
<AUTO> (default), or
<OFF> camera stays in color mode.
OFF
COLOR
Note
The NIGHT MODE screen determines
whether monochrome (B/W) or color
is present in the video. Options are:
<B/W> suppresses all color,
including color burst, present in the
video.
<B/W + CLR> (default) = B/W with
color burst
<COLOR> the camera never
switches to B/W in night mode.
MENU
CAMERA SETUP ...
VIEWING ...
WDR PRESETS
DAY/NIGHT SETUP ...
VERSION ...
>
RESTORE DEFAULTS <YES>
EXIT
13
This setting is dependent on
the AGC setting. (See ">AGC"
on page 10.)
<Custom>
Document 900.0418
10/06
Advertisement
Table of Contents
