ROSE DISPLAYS SPIDER CEILING TRACK WITH ADHESIVE Instruction Sheet

Spider™ Ceiling Track
Parts

Instructions for Hanging

Step 1

Clean ceiling area and mark location
for track on ceiling.

Step 2

Peel adhesive liner off Spider Track.

Step 3

Place Spider Track on marked
ceiling location. Be sure it is
postioned correctly.

Step 4

Apply pressure along track for
1 minute, then allow adhesive to
cure for 1 hour before using track.
Note: Install OneUp anchors with
ladderless RoPole Installation Tool.
The Spider Ceiling Track and RoPole are trademarks and OneUp is a registered
trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be
held liable for injury, loss or damage resulting from the use of these products. Part
#01INSSpider Track w/adhesive
Incept-5.30.01
Instruction Sheet
Spider™
Ceiling Track
with Adhesive
25-0027
Figure 1
Figure 3
Figure 2
Figure 4
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com