ROSE DISPLAYS SNAIL ADHESIVE DISK Installation Instructions

Snail Adhesive Disc

Parts

Instructions for Hanging

Instructions for Hanging

Step 1

Make sure surface is totally free of any dust or dirt
and completely dry. Remove the backing from the
disk and apply to the surface with firm pressure.
Hold firmly for about 20 seconds.

Step 2

For best results allow the adhesive to cure for at
least 30 minutes.

Step 3

You are now ready to hang your signs.

Important note:

Adhesive disc has metal rotating eye to align hook
direction if necessary. The Snail Adhesive Disc can
be used on tile, plaster ceilings, beams, painted
cement or window mullions.

Suggestion:

Use our Regular Hook in varying lengths with
the Snail Adhesive Disc. Please save and
reuse the Snail Adhesive disc and the hooks
for future projects.
The Snail Adhesive Disc is a trademark of Rose displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or damage
resulting from the use of this product. Part #99INSSAD
Incept-2.9.99
Installation Instructions
25-0080
25-0026
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com