ROSE DISPLAYS RAN-BAS-CC WITH CORD AND BARB Manual

Cable/Cord Spider

Parts

Instructions For Hanging

Step 1

Push barb up through large hole in bottom of
spider anchor. Turn barb to fit into slot in anchor
pocket. Place barb into slot and pull remainder of
string back through anchor. Fig.1

Step 2

Push the barb at other end of string through hole
in top of MultiClip. Fig. 2

Step 3

Turn barb and pull string back through MultiClip
to capture the barb. Fig. 3

Step 4

Insert MultiClip into top rail of holder. Fig. 4

Step 5

For directions on how to use a specific holder to
hang your poster, refer to the appropriate instruc-
tion sheet.
The Spider Anchor is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #00INSCord & Barb
Incept-3.17.00
TM
Anchor with Cord and Barb
Spider Anchor
RAN-BASE-CC
Cord and Barb
25-0015
Figure 3
Instruction Sheet
MultiClip
1UP-0100
Figure 1
Figure 2
Figure 4
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com