ROSE DISPLAYS RAN-BAS-CC WITH MONOFILAMENT AND BARB Manual

Cable/Cord Spider

Parts

Instructions For Hanging

Step 1

Push barb up through large hole in bottom of
spider anchor. Turn barb to fit into slot in anchor
pocket. Place barb into slot and pull remainder of
mono-filament back through anchor. Fig. 1

Step 2

Push the barb at other end of monofilament
through hole in top of MultiClip. Fig. 2

Step 3

Turn barb and pull monofilament back through
the MultiClip to capture the barb. Fig. 3

Step 4

Insert MultiClip into top rail of holder. Fig. 4

Step 5

For directions on how to use a specific holder to
hang your poster, refer to the appropriate instruc-
tion sheet.
The Spider Anchor is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #00INSMono & Barb
Incept-3.17.00
TM
Anchor with Monofilament and Barb
Spider Anchor Monofilament
RAN-BASE-CC and Barb 25-0016

Instruction Sheet

MultiClip
1UP-0100
Figure 3
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
Figure 1
Figure 2
Figure 4
e-mail:signware@rosedisplays.com