Advertisement
Quick Links
Advertisement
Related Manuals for Mark INFRA 40-9+
Summarization of Contents
MARK INFRA Mounting Instructions
Section 1.1: Initial Assembly Overview
Overview of initial assembly steps and component placement.
Section 1.2: Part Preparation and Fastening
Details part preparation and fastening process with specified hardware.
Section 1.3: Connection Points and Torque
Illustrates connection points and specifies torque values for secure assembly.
Section 1.4: Flue and Burner Side Identification
Identifies the flue side and burner side of the unit for correct orientation.
Section 1.5: Mounting Bracket Installation
Shows the installation of mounting brackets and their securement.
Section 1.6: Final Component Attachment
Details final steps for attaching components and completing assembly.
Section 2.1: Reflector Panel Mounting
Covers installation of reflector panels at fixed and bearing points.
Section 2.1.I: Fixed Mounting Point Details
Provides detailed steps for securing the reflector panel at fixed points.
Section 2.1.2: Bearing Point Reflector Installation
Details installation of the reflector panel at the bearing point.
Section 3.1: External Reflector Panel Setup
Guides installation of external reflector panels and their mounting profiles.
Section 3.2: External Reflector Panel Attachment
Illustrates the method for attaching external reflector panels to the structure.
Section 3.3: External Reflector Panel Securing
Shows how to secure external reflector panels using fasteners.
Section 3.4: External Reflector Panel Extension
Details the process for extending or connecting external reflector panels.
Section 3.5: Panel Fastening Procedure
Covers the procedure for fastening numerous panels.
Section 3.6: End Plate Installation
Illustrates the installation of end plates for the radiant tubes.
Section 4.1: Burner and Sleeve Installation
Details installation of the burner and the adjustable sleeve.
Section 4.2: Exhaust and Fresh Air Connection
Shows how to connect the exhaust air and fresh air intake sides.
Section 4.3: Unit Angle Adjustment
Illustrates the allowed angle adjustment for the mounted unit.
Section 4.4: Suspension and Alignment Check
Guides the suspension process and checks alignment.
Need help?
Do you have a question about the INFRA 40-9+ and is the answer not in the manual?
Questions and answers