ROSE DISPLAYS ANOFRAME ROUND NO LOAD WITH WALL HANGERS Manual

AnoFrame

Parts

Instructions For Assembly

Step 1

Insert corner brackets into vertical
AnoFrame side rails. Fig. 1
Note: Assembly brackets tension
tabs face towards outside of frames.

Step 2

Push top and bottom horizontal Ano
rails onto one side rail as shown in
Fig. 2

Step 3

Insert poster through side opening.
Fig 3

Step 4

Push final side rail into place as shown
in Fig 4.

Step 5

Install wall mounting hangers using a
Phillips head screwdriver. A plastic
expansion anchor is suggested for
drywall installations. Fig. 5

Step 6

Slide AnoFrame onto wall mounting
hangers. Fig 6
Note: The AnoFrame shown here is
a round profile. It is available in
either round or square profile.
The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss
or damage resulting from the use of these products.
Part #02INSANFRNoLoadHanger
Incept-8.15.02
TM
Round Profile Instruction Sheet
Corner
Brackets
AnoFrame Rails
12AF-100
Figure 1
Figure 3
Figure 5
Wall Mounting
Hangers
06-6067
top horizontal rail w/MultiClips
horizontal rail
Figure 2
Figure 4
Figure 6
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com