Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Devatec ELMC Series
Summarization of Contents
Safety Instructions
Introduction
Introduces the ElectroVap ELMC humidifier and emphasizes safety.
Safety Warnings and Symbols
Explains various safety symbols and warnings used throughout the manual.
Important Remarks
General Guidelines
Covers general manual use, intended use, storage, and maintenance guidelines.
Water and Electrical Requirements
Details water quality recommendations and electrical installation requirements.
Warranty and Liability
Outlines warranty terms and manufacturer liability.
Declarations
Declaration of Conformity
States compliance with European directives for the device.
RoHS Declaration
Confirms compliance with RoHS regulations regarding hazardous substances.
Product Description
Product Presentation and Characteristics
Describes the ELMC humidifier, its purpose, standard delivery, and accessories.
Unit Size and Dimensions
Provides detailed dimensions, mass, and technical data for various ELMC models.
Humidifier Component Parts
Identifies and labels the key components of the humidifier.
Important Installation Instructions
Lists crucial parameters like ambient temperature, humidity, and mounting distances.
Installation Procedures
Installation Procedure
Covers humidifier mounting and installation steps.
Water Supply
Details recommended water types, quality, pressure, and connection guidelines.
Dispersion Tube Positioning
Explains how to position steam dispersion tubes for optimal performance in ducts.
Steam Outlet
Details steam outlet hose selection and installation.
Condensate Draining with Siphon
Explains the method for condensate draining using siphons.
Drain Hose Connection
Shows the correct method for connecting the drain hose and recommended piping.
Electrical Connections
Covers electrical connection requirements and technical data.
Electrical Wiring
Illustrates wiring diagrams for various power supply configurations.
Communication Parameters
Specifies communication parameters for Modbus RTU and Bacnet MSTP.
Communication Protocol
Lists Modbus and Bacnet register addresses, object types, and values.
Wiring Diagrams
Provides wiring diagrams for different humidifier models and voltage configurations.
Control Signal Connection
Explains wiring for ON/OFF, proportional, humidity sensor, and digital control signals.
Transformer Connection Option
Shows supply options and jumper settings for transformer connections.
Operation and System Management
Commissioning the Humidifier
Step-by-step guide for commissioning the humidifier, including code entry.
User Information Menu
Overview of the user information menu for monitoring humidifier status.
Humidifier Status Menu
Details the different items available in the humidifier status menu.
Change Settings Menu
Explains the procedure to enter the access code and change unit settings.
Maintenance and Troubleshooting
Maintenance Alerts
Describes maintenance alerts (M1-M4) and the procedure for resetting them.
Default Messages and Alarms
Explains default messages (P1-P8) and their causes/remedies.
General Maintenance Procedures
Provides periodic checks, warnings, and safety precautions for general maintenance.
Steam Cylinder Maintenance
Details cleaning and replacement procedures for the steam cylinder.
Valve Maintenance
Instructions for maintaining the drain and water inlet valves.
Spare Parts
Hydraulic Part Spare Parts
Lists hydraulic spare parts with their codes and descriptions.
Water Inlet Valve and Draining Circuit Parts
Lists specific spare parts for the water inlet valve and draining circuit.
Electrical Part Spare Parts
Lists electrical spare parts with their codes and descriptions.
Need help?
Do you have a question about the ELMC Series and is the answer not in the manual?
Questions and answers