Related Manuals for AERMEC BHP Series
Summarization of Contents
USER INTERFACE
Main Page (Home)
Displays the main interface of the unit, showing date, time, and operating status.
MENU STRUCTURE
Function
Lists functions available within the unit's menu structure.
View
Details the 'View' menu options for checking unit status and information.
Parameter
Details various parameters for unit configuration and operation.
Commission (Function)
Covers settings related to unit commissioning and functional parameters.
Commission (Parameter)
Details parameters related to unit commissioning.
General
Discusses general settings and parameters for the unit.
BASIC FUNCTIONS
Switching the unit on and off (On/Off)
Explains how to turn the unit on and off using the control panel.
FUNCTION MENU
Navigating the menu
Guides users on how to navigate through the Function Menu.
Setting the operating mode (Mode)
Details how to select and set the unit's operating mode (Heat, Cool, etc.).
Activating the function for fast domestic hot water production (Fast hot water)
Describes how to enable the fast domestic hot water production feature.
Setting the priority between cooling and domestic hot water production (Cool+hot water)
Explains how to set priority between cooling and DHW production.
Set the priority between heating and domestic hot water production (Heat+hot water)
Explains how to set priority between heating and DHW production.
Setting the noise reduction function (Quiet mode)
Details how to configure the noise reduction (Quiet mode) settings.
Setting the automatic setting compensation on the basis of external air (Weather depend)
Describes how to set automatic compensation based on external air temperature.
Setting a timer for programmed switch-on and/or switch-off (Weekly timer)
Explains how to set programmed on/off times using a weekly timer.
Enabling the Holiday Program function used for the weekly timer (Holiday release)
Guides on enabling the Holiday Program feature for the weekly timer.
Enabling/disabling the anti-legionella cycle (Disinfection)
Details how to enable/disable the anti-legionella disinfection cycle.
Setting a timed switch-on/switch-off (Clock timer)
Explains how to set a timed on/off schedule for the unit.
Setting programmed setting changes on system water delivery (Temp. timer)
Describes setting programmed changes for water delivery temperature over time.
Enabling emergency operation for heating or DHW (Emergen. mode)
Explains how to activate the emergency operation mode for heating or DHW.
Setting the winter period absence function (Holiday mode)
Details setting up the unit for absence periods, like winter holidays.
Setting the daily timer programming (Preset mode)
Guides on setting daily timer programs for specific periods.
Deleting current errors (Error reset)
Instructions on how to reset current errors on the unit.
WiFi connection reset function (Wifi reset)
Explains how to reset the WiFi connection of the unit.
Loading the default settings (Reset)
Describes how to restore factory default settings for the unit.
PARAMETER MENU
Navigating the menu
Guides users on how to navigate the Parameter Menu.
Setting the temperature set-points used by the unit in the various modes (WOT-Cool~ AT-hot water)
Details setting temperature set-points for different operating modes.
VIEW MENU
Navigating the menu
Guides users on how to navigate the View Menu.
Viewing the status of the unit components (Status)
Explains how to view the operational status of various unit components.
Viewing the status of the unit parameters (Parameter)
Describes how to view the current values of the unit's operating parameters.
Viewing the active errors on the unit (Error)
Details how to view currently active errors and alarms on the unit.
Viewing the error log (Error log)
Explains how to access and view the historical record of unit errors.
Viewing software information (Version)
Guides on how to view the installed software version of the unit.
COMMISSION MENU
Navigating the menu
Guides users on navigating the Commission Menu for setup.
Setting the control logic (Ctrl.state)
Explains how to set the unit's control logic based on water or air temperature.
Setting the status of the 2-way valve in cooling mode (Cool 2-Way valve)
Details how to set the 2-way valve status in cooling mode.
Setting the status of the 2-way valve in heating mode (Heat 2-Way valve)
Details how to set the 2-way valve status in heating mode.
Setting solar system integration (Solar setting)
Information regarding the solar system integration setting, noted as not available.
Set the installation of a compatible Aermec accessory tank (DHW tank)
Explains how to specify if a DHW storage tank accessory is installed.
Setting the use of an external thermostat (Thermostat)
Guides on setting the usage of an external thermostat with the unit.
Setting an additional heat source (Other thermal)
Details how to activate/deactivate and manage an additional heat source.
Setting an additional heater (Optional E-heater)
Explains how to activate/deactivate and configure an optional electric heater.
Setting the installation of the remote room temperature probe (Ambient sensor)
Guides on enabling or disabling the remote room temperature probe.
Setting the air purging function (Air removal)
Details how to activate air purging for the unit's circuits.
Setting the pre-heating procedure for radiant panels (Floor debug)
Explains the procedure for pre-heating radiant panels.
Activating the defrost cycle (Manual defrost)
Guides on activating or deactivating a forced defrost cycle.
Activating mode forcing (Force mode)
Describes how to activate or deactivate a specific heating or cooling function.
Activating auxiliary device management (Gate-Ctrl)
Explains how to manage switch-on/off via an external contact.
Setting of max. absorption (A/P limit)
Notes that this function is not available.
Setting the serial address of the unit (Address)
Details how to set the unit's serial address for Modbus control.
Setting the refrigerant recovery function (Refri. recovery)
Guides on activating/deactivating refrigerant recovery for maintenance.
Set the management logic for the compatible Aermec accessory tank heater (elec. tank heater)
Explains how to set the management logic for the electric tank heater.
Set the memory contact function (Memory contact)
Details activating/deactivating memory storage for external contact function.
Setting the maximum temperature for the DHW storage tank via heat pump only (T HP max)
Guides on setting the max DHW tank temperature using the heat pump.
Setting the cooling operating time (Cool run time)
Explains setting cooling operating time for terminal temperature stability.
Setting the heating operating time (Heat run time)
Refers to paragraph 7.21 for heating operating time settings.
MAIN MENU
Navigating the menu
Guides users on how to navigate the Main Menu.
Setting the unit of measurement (Temp. unit)
Explains how to change the unit of measurement for temperature.
Activating/deactivating the memory (On/off memory)
Details how to activate/deactivate saving of parameter/function settings.
Activating/deactivating the sound (Beeper)
Explains how to turn the touch sound (beeper) on or off.
Setting the display lighting (Back light)
Guides on setting the display lighting logic (active or energy save).
Setting the system date and time (Time&Date)
Details how to set the system's current date and time.
Selecting the system language (Language)
Explains how to choose the system language from available options.
Activating the WiFi (WiFi)
Guides on activating the WiFi signal for app control.
ModBus RS485 connection
Provides information on connecting the unit via ModBus RS485.
Need help?
Do you have a question about the BHP Series and is the answer not in the manual?
Questions and answers