Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zip C40
Summarization of Contents
SECTION 1: Using these instructions
Before You Start
Guidance on using the document and obtaining full installation and user instructions online.
Explanation of Symbols
Visual guide to symbols used in the manual for warnings and instructions.
SECTION 2: Important Safety Instructions
Compliance Standards
Electrical and plumbing installation compliance standards for Australia and UK.
General Safety Precautions
Age restrictions and supervision requirements for appliance use.
Refrigerant Safety
Information on refrigerants used, maintenance, and ventilation requirements.
Qualifications for Installation and Service
Requirement for installation and service work to be done by qualified tradespeople.
Lifting and Handling Precautions
Precautions and guidance for safely lifting the Command Centre unit.
Airflow and Temperature Requirements
Ambient temperature range and air circulation requirements for optimal operation.
Frost Protection Measures
Advice on protecting the unit from freezing when not in use.
SECTION 4: Technical Data
Model Specifications
Table detailing power rating, dimensions, and weight for different HydroTap models.
Electrical and Water Supply Requirements
Specifies required electrical connections and water pressure limits for installation.
SECTION 6: Set Up the Ventilation
Ventilation Clearance Requirements
Illustrates required air clearances around the Command Centre for safe operation.
Ventilation for CS100 & C100 Models
Details air intake and exhaust for CS100/C100, emphasizing vent tray fitting.
Ventilation for C40, CS Home, C Home Models
Explains air intake and exhaust for C40/CS Home/C Home models and extra ventilation needs.
SECTION 7: Fit the Carbonation Valve
Carbonation Valve Flow Adjustment
Instructions on adjusting the carbonation valve flow rate using an Allen key or screwdriver.
SECTION 8: Connect the Water Supply
Water Supply Connection Details
Guidance on connecting the water supply using fittings, PTFE tape, and strainer orientation.
SECTION 9: Install the CO₂ Cylinder and Regulator
Securing the CO₂ Cylinder
Instructions and diagrams for securely mounting CO₂ cylinders vertically.
CO₂ Regulator Identification
Identifies components of the Universal G5 and 1.2kg non-adjustable CO₂ regulators.
Fitting the Regulator and Connecting the Gas Hose
Step-by-step guide to fitting the regulator, adaptor, and connecting the CO₂ hose.
Adjusting the CO₂ Regulator
Procedure for adjusting the regulator's outlet pressure and turning it ON/OFF.
Testing for CO₂ Leaks
Method for testing gas connections for leaks using soapy water and identifying leaks.
SECTION 10: Connect the Command Centre
Generic Connection Instructions and Hose Tips
General guidance for connecting HydroTap components and tips for proper hose installation.
Connecting the Command Centre for CS100 Models
Illustrates connection points for CS100 models, including foam insulation for pipes.
Connecting the Command Centre for C40, C100 Models
Shows connection points for C40/C100 models, highlighting foam insulation for the blue pipe.
Connecting the Command Centre for CS Home Models
Details connection points for CS Home models, indicating foam insulation for white and blue pipes.
Connecting the Command Centre for C Home Models
Illustrates connection points for C Home models, specifying foam insulation for the blue pipe.
SECTION 11: Commissioning
Filter Flush Procedure
Steps for flushing the filter, involving opening a valve and collecting water.
Setting Language and Purging CO₂
Guidance on setting the display language and purging CO₂ from the system.
Tank Flush and Carbonation Valve Adjustment
Instructions for flushing the tank and adjusting the carbonation valve.
Need help?
Do you have a question about the C40 and is the answer not in the manual?
Questions and answers