Zip C100 Quick Start Installation Manual

Zip C100 Quick Start Installation Manual

Command centre chilled, chilled/sparkling models

Advertisement

uick Start Installation Guide
Q
Zip
HydroTap G5
Command Centre
Chilled, Chilled/Sparkling models
AFFIX PRODUCT LABEL HERE
Australia
UK
Visit our website to
download the manuals
Quick Start Installation Guide
1
807120 v1.00 01.21 G5 C CS Quick Start Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C100 and is the answer not in the manual?

Questions and answers

Summarization of Contents

SECTION 1: Using these instructions
Before you start
Guidance before commencing installation and operation of the HydroTap.
Explanation of symbols
Visual cues and their meanings used throughout the installation guide.
SECTION 2: IMPORTANT SAFETY INSTRUCTIONS
Compliance
Electrical and plumbing compliance standards for installation in Australia and UK.
Safety
Guidelines for safe use, especially concerning children and persons with reduced capabilities.
Refrigerant
Information on refrigerants used, maintenance, and ventilation requirements.
Qualifications
Requirement for installation and service work to be performed by qualified tradespeople.
Lifting
Precautions and advice for safely lifting the HydroTap Command Centre.
Airflow
Ambient temperature range and air circulation requirements for optimal operation.
Frost protection
Recommendations for protecting the unit from freezing when not in use.
SECTION 6: Set up the ventilation
CS100 & C100 models
Ventilation setup details specific to CS100 and C100 model installations.
C40 CS Home, C Home models
Ventilation setup details for C40, CS Home, and C Home models.
All models
Additional ventilation requirements if cupboard temperature exceeds 35°C.
SECTION 7: Fit the carbonation valve
Carbonation valve flow adjustment
Guide to adjusting the carbonation valve for optimal flow rate.
SECTION 9: Install the CO₂ cylinder and regulator
Secure the cylinder
Instructions for securely mounting the CO₂ cylinder vertically.
CO₂ regulator identification
Identification of components on the Universal G5 and 1.2kg cylinder regulators.
Fit the regulator and connect the gas hose
Steps for fitting the regulator and connecting the CO₂ gas hose.
Adjust the regulator
Procedure for adjusting the regulator's outlet pressure.
Test for leaks
Method for testing gas connections for leaks using soapy water.
SECTION 10: Connect the Command Centre
Generic installation instructions
General guidance for connecting HydroTap, mixer tap, and accessories.
Tips for hose connection
Best practices for connecting hoses, ensuring proper fit and no tension.
CS100 models
Specific instructions for connecting the Command Centre for CS100 models.
C40, C100 models
Specific instructions for connecting the Command Centre for C40 and C100 models.
CS Home models
Specific instructions for connecting the Command Centre for CS Home models.
C Home models
Specific instructions for connecting the Command Centre for C Home models.

Table of Contents