Care And Maintenance; Cleaning The Cabinet; Cleaning Thelcd Touchscreen; Installing The Remote Control Batteries - Classe Audio CAP-2100 - MANUEL 2 Owner's Manual

cleaning the cabinet

Caution!
cleaning the
LCD touchscreen
Important!
installing the
remote control batteries
36

Care and Maintenance

To remove dust from the cabinet of your integrated amplifier, use a feather
duster or a soft, lint-free cloth. To remove dirt and fingerprints, we recommend
isopropyl alcohol and a soft cloth. Dampen the cloth with alcohol first and
then lightly clean the surface of the integrated amplifier with the cloth. Do
not use excessive amounts of alcohol that might drip off the cloth and into the
integrated amplifier.
At no time should liquid cleaners be applied directly to the
surface of the integrated amplifier, as direct application
of liquids may result in damage to electronic components
within the unit.
To clean the LCD touchscreen, use a microfiber eyeglass wipe or soft, lint-free
cloth, together with a cleaning solution designed for plastic eyeglasses or LCD
computer monitors/televisions.
Spray the solution onto the cloth or tissue – never directly
onto the touch screen.
The battery compartment is situated at the base of the remote control. Remove
the two screws holding the base plate in place, taking care not to lose them.
Insert the two AA batteries (supplied), ensuring that the polarity is the same as
that indicated on the inner surface of the remote control.