Classe Audio CAP-2100 - MANUEL 2 Owner's Manual page 35

e. Finally, if everything is still fine, place the integrated amplifier in
standby and carefully reconnect the speaker wires. Check both
ends of the speaker wires for possible short circuits. Then power
up the integrated amplifier again. If the integrated amplifier
remains functional (the fuse does not blow), then the original
fuse probably blew in order to protect the integrated amplifier
from a large AC mains surge. If it blows again, contact your
Classé dealer for assistance.
9. The Standby LED is flashing fast, and there is an error message
displayed on the touchscreen LCD.
• Try resetting the unit by disconnecting it from the AC mains
power, waiting a few seconds, and reconnecting the integrated
amplifier to power. If this does not solve the problem, contact
your Classé dealer for assistance.
35