CM 5312A Operating, Maintenance & Parts Manual

CM 5312A Operating, Maintenance & Parts Manual

Hand operated lever hoist

Advertisement

OPERATING, MAINTENANCE
& PARTS MANUAL
MANUAL DE FUNCIONAMIENTO,
MANTENIMIENTO Y PIEZAS
MANUEL D'ENTRETIEN,
D'OPÉRATION ET DE PIÈCES
HAND OPERATED LEVER HOIST
POLIPASTO MANUAL DE PALANCA
PALAN MANUEL À LEVIER
SERIES 653-A
LEVER HOIST
Before installing hoist, fill in the information below.
Antes de instalar el polipasto, rellene los datos siguientes.
Enregistrez les informations suivantes avant de faire l'installation.
Rated Load
/ Carga Nominal / Charge nominale
Serial No.
/ N° de Serie / No. de Ser.
Purchase Date
/ Fecha de Compra / Date d'achat
CAPACITIES:
3/4, 1, 1½, 2, 3 and 6 TON
(750, 1000, 1500, 2000,
3000 and 6000 kg.)
Follow all instructions and warnings
for inspecting, maintaining and
operating this hoist.
The use of any hoist presents some risk
of personal injury or property damage. That
risk is greatly increased if proper instructions
and warnings are not followed. Before using
this hoist, each operator should become
thoroughly familiar with all warnings,
instructions and recommendations
in this manual. Retain this manual for
future reference and use.
Forward this manual to operator.
Failure to operate equipment as
directed in manual may cause injury.
CAPACIDADES DE CARGA:
3/4, 1,1½, 2, 3 y 6 toneladas
(750, 1000, 1500, 2000, 3000 y
6000 kg.)
Siga todas las instrucciones y
advertencias para inspeccionar,
mantener y operar este polipasto.
El uso de cualquier polipasto presenta algunos
riesgos de daños a las personas o a las
cosas. Este riesgo se ve incrementado si no
se siguen correctamente las instrucciones
y advertencias. Antes de usar el polipasto
el operario debería estar familiarizado con
rodas las advertencias, instrucciones y
recomendaciones de este manual. Guarde
este manual para futuras consultas.
Entregue este manual al operario. Si el
equipo no se maneja tal y como se
recomienda en el presente manual, es
posible que se produzcan situaciones
de peligro que pueden resultar en
daños personales.
CHARGES NOMINALES:
3/4, 1,1½, 2, 3 et 6 TONNES
(750, 1000, 1500, 2000, 3000 et
6000 kg.)
Veuillez vous conformer à toutes les
instructions et avertissements d'inspection,
d'entretien et d'opération de ce palan.
L'utilisation de tout appareil de levage
comporte des risques de blessures ou
de dégâts matériels. Ces risques sont
de beaucoup accrus si les instructions
et avertissements ne sont pas suivis.
Tous les opérateurs devraient se
familiariser complètement avec toutes
les recommandations instructions et
avertissements de ce manuel avant d'utiliser
ce palan. Conservez ce manuel pour
utilisation et référence future.
Remettre ce manuel à l'opérateur.
L'utilisation de cet équipement contrairement
aux directives de ce manuel peut causer
des blessures.
P/N: 192065084 Rev AA March 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5312A and is the answer not in the manual?

Questions and answers

Summarization of Contents

Warranty Information
Warranty Limitations and Damages
Details on warranty limitations, remedies, and excluded damages.
Indemnification and Safe Operation
Buyer's responsibilities for safe use and liability.
CMCO Warranty Terms
Specific warranty coverage for CM hoists by duration.
Safety Guidelines
General Safety Precautions
Overarching safety rules for operating the hoist.
Environmental and Load Hazards
Warnings about adverse environments and hazardous loads.
Product Overview
Product Description
Description of the CM Series 653-A lever hoist.
Technical Specifications
Detailed specifications and dimensions for the hoist models.
Installation and Operation
Unpacking and Initial Checks
Steps for unpacking, inspecting, and preparing the hoist.
Operating Instructions
General guidelines for operating the lever hoist.
Free Chaining Feature
How to use the free chaining mechanism for load attachment.
Safe Operational Procedures
Hook and Load Attachment
Proper techniques for attaching loads to the hoist hook.
Lifting and Pre-Use Inspection
Instructions for lifting loads and pre-use hoist inspection.
Maintenance and Inspection
Inspection Types and Schedules
Differentiating frequent and periodic inspections with schedules.
Periodic Inspection Items
Specific components to inspect during periodic checks.
Chain Care and Lubrication
Load Chain Inspection
How to inspect the load chain for wear, damage, and stretch.
Chain Lubrication Guidelines
Recommended lubricants and frequency for the load chain.
Repair and Assembly
Disassembly and Assembly Procedures
Steps for taking apart and reassembling the hoist.
Replacing the Load Chain
Guide for replacing the hoist's load chain.
Support and Testing
Recommended Spare Parts
List of essential spare parts for the hoist.
Preventative Maintenance Program
Establishing a program for hoist longevity and reliability.
Hoist Testing Protocols
Procedures for testing repaired or used hoists.
Inspection and Maintenance Checklist
Inspection Frequency and Items
Checklist items and their inspection frequency.
Troubleshooting Guide
Common Operational Problems
Identifying and resolving common hoist operational issues.
Repair Parts Listing
Ordering Replacement Parts
Information required for ordering spare parts.

Table of Contents