Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Ayrton eurus tc
Summarization of Contents
SAFETY INSTRUCTIONS
IMPORTANT SAFETY WARNING
Crucial safety warnings and necessary precautions for safe operation and installation of the lighting fixture.
FEATURES
LIGHT SOURCE SPECIFICATIONS
Information on the LED type, color temperature, and lifespan of the light source.
MOVEMENT AND COLOR SYSTEMS
Details pan/tilt movement, CMY+CTO mixing, and gobo/color wheel capabilities.
FIXTURE OVERVIEW
FRONT COMPONENTS IDENTIFICATION
Identifies key components like Lens, Tilt Lock, Display, Jog Wheel, Pan Lock, Handle.
REAR CONNECTION PORTS
Identifies DMX In/Out, USB, Power In, RJ45 ports, and Battery.
DIMENSIONAL DRAWINGS
FIXTURE DIMENSIONS
Provides detailed overall dimensions of the lighting fixture in millimeters and inches.
INSTALLATION INSTRUCTIONS
RIGGING THE DEVICE
Instructions and cautions related to rigging the lighting fixture safely.
OPERATING INSTRUCTIONS OF THE INTERNAL DMX WIRELESS SYSTEM
EQUIPMENT AND LED INDICATORS
Lists required equipment and explains LED indicator meanings for the wireless system.
WDMX MENU AND WIRELESS SETUP
Details WDMX menu functions and steps for setting up the wireless system.
DISPLAY AND NAVIGATION
JOG WHEEL OPERATION
Explains how to use the Jog Wheel for display navigation, settings, and program control.
OPTIONS - SYSTEM SETTINGS
ADDRESS AND MODE CONFIGURATION
Settings for DMX address, operational modes, and user-defined channels.
STATUS AND SERVICE SETTINGS
Configuration for status, service PIN, IP, and USB updates.
FAN AND DISPLAY SETTINGS
Settings for fan control, display adjustments, and signal selection.
OPTIONS - ADVANCED SETTINGS
WIRELESS DMX AND DIMMING OPTIONS
Configuration for wireless DMX and dimming curve selection.
INITIAL POSITION AND TEMPERATURE SETTINGS
How to display initial positions and set temperature units.
ADDRESS CONFIGURATION
SET DMX ADDRESS
Step-by-step guide on how to set the DMX address using the display and jog wheel.
MODE SELECTION
USER MODE AND EDIT USER MODE
Guide on creating and editing user-defined channel orders and modes.
STATUS SETTINGS
PAN/TILT REVERSE AND PAN DEGREE
How to configure Pan/Tilt reverse and select pan degree (630 or 540).
FEEDBACK AND RESET MODE
How to manage feedback and select reset modes for movement functions.
CMY, ZOOM/FOCUS SPEED, AND HIBERNATION
ETHERNET TO DMX
How to enable or disable Ethernet to DMX functionality.
USB UPDATES AND FAN CONTROL
DISPLAY SETTINGS
How to configure display shut-off time and other display parameters.
SIGNAL SELECT AND TEMPERATURE UNITS
INITIAL POSITION AND WIRELESS DMX
How to display initial positions and manage wireless DMX settings.
DIM CURVE, REFRESH SELECT, AND GOBO CORRECTION
RESET P/T FADE AND FROST EFFECT
How to reset Pan/Tilt fade and configure the frost effect.
INFO AND TIME INFORMATION
CURRENT TIME AND TOTAL LIFE HOURS
How to view current operating time and total accumulated life hours.
LAST RUN HOURS AND LED HOURS
How to display last run time and LED operating hours.
TIMER PIN AND CLEAR LAST RUN
HEAD TEMPERATURE DISPLAY
How to display the temperature of the fixture's head unit.
FAN INFO AND SOFTWARE VERSION
NETWORK CONFIGURATION
How to view network settings like IP, Mask, and Mac address.
TEST FUNCTIONS
HOME POSITION AND TEST CHANNEL
How to reset the device to home and test individual DMX channels.
MANUAL CONTROL AND CALIBRATION
GOBO REPLACE
Instructions related to replacing gobo wheels.
DMX PROTOCOL
DMX CHANNEL FUNCTIONS AND VALUES (62 CHANNELS)
Details DMX channel functions and their corresponding value ranges for 62 channels.
ERROR MESSAGES
MOVEMENT SYSTEM ERRORS (PAN, TILT, ZOOM, FOCUS)
Describes error messages related to movement functions (Pan, Tilt, Zoom, Focus).
COLOR WHEEL AND CYAN/MAGENTA ERRORS
Describes error messages for color wheel and specific color wheel (Cyan, Magenta) malfunctions.
FROST, BLADE, AND ROTATING BLADE ERRORS
ALL BLADE ROTATION AND ANIMATION ROTATION ERRORS
Describes error messages for All Blade Rotation and Animation Rot wheel malfunctions.
CLEANING AND MAINTENANCE
CAUTION: DISCONNECT POWER BEFORE MAINTENANCE
Crucial safety reminder to disconnect power before performing any maintenance.
Need help?
Do you have a question about the eurus tc and is the answer not in the manual?
Questions and answers