Starting When The Engine Is Cold; Changing Gears - GAS GAS PAMPERA 450 - 2007 Manual

STARTING WHEN THE ENGINE IS COLD

The cold start function is responsible for aiding the engine start if it
is cold.
After some minutes, the engine will be at normal operating
temperature. The engine will reach its optimal temperature, in low
time and without causing damage.
NOTE
- If the engine is flooded then start with the throttle fully open.
- The motorcycle may be started in gear if the clutch is
disengaged.
STARTING THE ENGINE
1.-Ensure that the motorcycle is in neutral or press the clutch.
2.-Turn the fuel tap key clockwise to "ON"
3.-If the engine is cold, pull out the choke
4.-Press the starter button to start the motorbike.
5.-Even after the engine has started, leave the choke out.
SHIFTING GEARS
The transmission is a 6 speed, return shift type meaning that to go
back to first gear from a higher gear, you must shift back through
the gears one by one.
To engage first gear from neutral, pull in the clutch lever and push
down on the shift pedal then release the pressure on the shift pedal
and gently release the clutch lever.
When changing gears, press firmly on the shift pedal to ensure
complete, positive shifting. Careless, incomplete shifts can cause
the transmission to jump out of gear and lead to engine damage.
(B)
(B). Shift pedal.
13
- -
CAUTION